Hazardous Location Installation - For USA and Canada
General
ST-6•00TA is suitable for use in Class I, Division 2, Groups A, B, C, and D hazardous locations or in non-hazardous locations. Before installing or using this product, confirm that the Hazardous Location certification appears on the product labeling.
DANGER |
---|
HAZARD OF ELECTRIC
SHOCK, EXPLOSION, OR ARC FLASH
Failure to follow these instructions will result in death or serious injury.
|
WARNING |
---|
EXPLOSION HAZARD
Failure to follow these instructions can result in death, serious injury, or equipment
damage.
|
Make sure that this product is properly rated for the location. If the intended location does not presently have a Class, Division and Group rating, then users should consult the appropriate authorities having jurisdiction in order to determine the correct rating for that hazardous location.
Operation and Maintenance
The systems have been designed for compliance with relevant spark ignition tests.
WARNING |
---|
EXPLOSION HAZARD
In addition to the other instructions in
this manual, observe the following rules when installing this product
in a hazardous location:
Failure to follow these instructions can result in death, serious injury, or equipment
damage.
|