PS6000-MM01-EN_00

System Recovery

To restore the system, recovery media is required. Either purchase the optional recovery USB (PFXYP6RUSW10), or download the recovery tool from our website.

NOTE:
  • The optional recovery USB is only for restoring the operating system. If backup is required in addition to operating system recovery, download the recovery tool from our website.
    https://www.pro-face.com/trans/en/manual/1085.html

  • For the backup process, refer to our website’s recovery tool download page.

  • When HORM is enabled or immediately after hibernation, system backup or recovery will not run properly. Perform system backup or recovery after first disabling HORM and then shutting down the product.

  1. Insert the recovery media.
  2. Turn on the product.
  3. While the boot screen is displayed, press the [F7] key.
  4. Enter the password (default password: Pw#12345).
  5. Select the recovery media name that starts with “UEFI”. The name below is for reference only.
  6. If you recover the system with an optional recovery USB (PFXYP6RUSW10), select OK. If you use your own USB with the recovery tool downloaded from our website, select Restore > OK.

    Optional recovery USB

    Recovery tool

  7. Select the disk to recover. If there is only one storage, the following screen does not apear and skip to step 8.
  8. In the confirmation screen, select OK.
  9. Recovery begins.
  10. After recovery is complete, the Shutdown/Restart selection screen is displayed.
  11. Remove the recovery media.
  12. Select either Shutdown or Restart as required.

Search Results (0)

Close