Interfaces
Box Module
Advanced Box / Standard Box | ||
---|---|---|
Serial interface COM | Asynchronous transmission | RS-232C (not isolated) x 1 |
Data length | 7 or 8 bits | |
Stop bit | 1 or 2 bits | |
Parity | None, odd or even | |
Data transmission speed | 2,400...115,200 bps | |
Connector | D-Sub 9–pin (plug) | |
USB (Type A) interface | Connector | USB 3.0 (Type A)
x 2 USB 2.0 (Type A) x 2 |
Power supply voltage | 5 Vdc ±5% | |
Maximum current supplied | USB 3.0 (Type A): 900 mA/port USB 2.0 (Type A): 500 mA/port |
|
Maximum transmission distance | USB 3.0 (Type A): 3 m (9.84 ft) USB 2.0 (Type A): 5 m (16.4 ft) |
|
USB (Type C) interface*1 | Connector | USB 3.0 (Type C) x 1 |
Power supply voltage | 5 Vdc ±5% or 12 VDC ±5%, USB power delivery (source) supported | |
Maximum current supplied | 900 mA/port 3000 mA/port when USB power delivery is enabled*2 *3 |
|
Maximum transmission distance | 3 m (9.84 ft) | |
Resolution | Up to 4,096 x 2,304 pixels at 60 Hz | |
Ethernet interface | Standard | IEEE1588, 10 BASE-T/ 100 BASE-TX/ 1000BASE-T, Wake-on-LAN (WOL) supported*4 |
Connector | Modular jack (RJ-45) x 2 | |
DisplayPort | Version | V 1.2, dual mode (DP++) supported |
Resolution | Up to 4,096 x 2,304 pixels at 60 Hz |
*1 The USB (Type C)interface supports alternate mode (DisplayPort) and USB power delivery (source, 5 Vdc/12 Vdc). When using USB power delivery, an E-Marked (electronically marked) cable is required.
*2 When Advanced Box is connected to the Display Module, the power supply capability of USB power delivery is limited to 30 W.
*3 For Standard Box, USB power delivery is effective only when Standard Box is used alone.
*4 When the status is S4 (hybrid shutdown), Wake-on-LAN is unavailable.
Display Module
12-inch / 15-inch | ||
---|---|---|
USB (Type A) interface | Connector | USB 2.0 (Type A) x 1 |
Power supply voltage | 5 Vdc ±5% | |
Maximum current supplied | 500 mA | |
Maximum transmission distance | 5 m (16.4 ft) |