Parts Identification
- 
                     
Status LED
 - 
                     
Front USB cover
 - 
                     
USB 2.0 (Type A)*1
 - 
                     
USB 2.0 (micro-B) (this interface is unavailable.)
 - 
                     
VESA mount screw hole*2
 - 
                     
DVI-D input interface
 - 
                     
USB 2.0 (Type B)
 - 
                     
Power connector
 
*1 By default, the front USB is disabled. To enable, set in the Launcher.
*2 This product can be mounted to commercially available
               monitor arms that comply with the VESA standard (100 x 100 mm). Use four M4 screws
               (screw length: 10 mm [0.4
               in]). The necessary torque is 0.7 to 0.8 N•m (6.2 to 7.1 lb-in).
VESA mounting is not UL certified.



