Accessories
|
Product name |
Product number |
Description |
|
|---|---|---|---|
|
USB (Type B) interface |
|||
|
USB Cable (5 m) |
FP-US00 |
Cable used for touch panel data transmission between a host (USB Type A) and this product (USB Type B). |
|
|
DVI-D input interface |
|||
|
DP-DVI Cable (5 m)*1 |
PFXYFPCBDPDV5M |
DP-DVI cable used to receive the image signal from host, passive type(5 m) |
|
|
DP-DVI Cable (3 m) |
PFXZPBCBDPDV32 |
DP-DVI cable used to receive the image signal from host, active type (3 m) |
|
|
DP-DVI Adapter |
PFXZPBADCVDPDV2 |
DP-DVI Adapter can convert DP to DVI-D (socket), active type. |
|
|
DVI Cable (5 m) |
FP-DV01-50 |
DVI-D cable used to receive the image signal from host. DVI 1.0 compliant (DVI-D 24-pin plug) (5 m) |
|
|
Others |
|||
|
Enhanced Front USB Cover (With Screw) |
PFXZCDCVUS1 |
Front USB cover with fixing screw, corresponding to IP66F, IP67F, Type 1/4X Indoor Use Only/13 or ATEX certifications (5 pieces/set) |
|
|
Screen Protection Sheet |
12-inch |
CA7-DFS12-01 |
Disposable, dirt-resistant sheet for screen (5 sheets/set) |
|
15-inch |
CA3-DFS15-01 | ||
|
Anti-Glare Sheet |
10-inch Wide |
PFXZCAG5W1 |
Prevent reflections, dirt-resistant sheet for screen (5 sheets/set) |
|
12-inch Wide |
PFXZCAG6W1 | ||
|
15-inch Wide |
PFXZCAG7W1 | ||
|
19-inch Wide |
PFXZCAG8W1 | ||
|
22-inch Wide |
PFXZCAG9W1 | ||
|
Panel Cutout Adapter*2 |
12-inch Wide |
PFXZPAT6W1 |
Panel cutout adapter for mounting FP6000 Series/PS6000 Series Panel Type (12-inch wide) in cutout for PS5000 Series (12-inch wide). |
|
15-inch Wide |
PFXZPAT7W1 |
Panel cutout adapter for mounting FP6000 Series/PS6000 Series Panel Type (15-inch wide) in cutout for PS5000 Series (15-inch wide). |
|
|
19-inch Wide |
PFXZPAT8W1 |
Panel cutout adapter for mounting FP6000 Series/PS6000 Series Panel Type (19-inch wide) in cutout for PS5000 Series (19-inch wide). |
|
|
22-inch Wide |
PFXZPAT9W1 |
Panel cutout adapter for mounting FP6000 Series/PS6000 Series Panel Type (22-inch wide) in cutout for PS5000 Series (22-inch wide). |
|
*1 This is a passive cable. The host PC must support DP++ (Display Port Dual mode).
*2 The range for the allowable panel thickness varies depending on the panel cut adapter. For information, refer to the panel cut adapter instruction manual.