Panel Cut Dimensions
Based on the panel cut dimensions, open a mount hole on the panel.

| A | B | C | 
|---|---|---|
| 22.5 mm (+0/-0.3
                           mm) (0.88 in [+0/-0.01 in]) | 4.0 mm (+0/-0.2 mm) (0.15 in [+0/-0.007 in]) | 30.0 mm (+0/-0.2 mm) (1.18 in [+0/-0.007 in]) | 
Panel thickness recommended range:
| Panel material | Thickness range (D) | 
|---|---|
| Steel | 1.5... 6.0 mm (0.06... 0.23 in) | 
| Glass fiber reinforced plastics (minimum GF30) | 3.0... 6.0 mm (0.12... 0.23 in) | 
About Spacer
If the panel thickness does not meet the conditions for use with the product, you can use an optional spacer.
| Product number | PFXZCM6MP2 | PFXZCM6MP4 | 
|---|---|---|
| Spacer size (W x H x D) | 145 x 105 x 2 mm (5.71 x 4.13 x 0.08 in) | 204 x 140 x 2 mm (8.03 x 5.51 x 0.08 in) | 
| Spacer material | Stainless steel | Stainless steel | 
The thickness and material of panels you can use the spacer are as follows.
| Panel material | STM-6200WA | STM-6400WA | 
|---|---|---|
| Steel | 1 ... 1.5 mm (0.04 ... 0.06 in) | 1 ... 1.5 mm (0.04 ... 0.06 in) | 
| Glass fiber reinforced plastics (minimum GF30) | 1 ... 3 mm (0.04 ... 0.12 in) | 2 ... 3 mm (0.08 ... 0.12 in) | 
| Other plastic | 1 ... 3 mm (0.04 ... 0.12 in) | not possible | 
 
		  