Accessories
This section introduces optional products that can be used
with this product.
NOTE: For host controllers
and connection cables, refer to the corresponding device driver manual
of your screen editing software.
| Product name | Product number | Description |
|---|---|---|
| Serial interface | ||
| RS-422 Terminal Block Conversion Adapter | PFXZCBADTM1 | Connects output from a serial interface (D-sub 9 pin plug) directly to an RS-422 terminal block. |
| COM Port Conversion Adapter | CA3-ADPCOM-01 | Connects optional RS-422 communication items to serial interface. |
| RS-232C Isolation Unit | CA3-ISO232-01 | Connects a host controller to this product and provides isolation (RS-232C and RS-422 are switchable). |
| USB (Type A) interface | ||
| USB Front Cable (1 m) | CA5-USBEXT-01 | Extension cable that attaches USB interface to front panel. |
| USB (micro-B) interface | ||
| USB Transfer Cable | PFXZUSCBMB2 | Cable for transferring screen data from a PC (USB Type A) to this product (USB micro-B) |
| USB (micro-B) Front Cable | PFXZCIEXMB2 | Extension cable that attaches USB interface to front panel. |
| Others | ||
| Rear Module Installation Adapter | PFXZCM6DSA | Adapter for installing the rear module on a DIN rail. |
| Screen Protection Sheet with UV Protected | PFXZCIDS42 | Disposable, dirt-resistant and ultraviolet protection sheet for 4-inch Wide screen (1 sheet/set). |
| PFXZCIDS72 | Disposable, dirt-resistant and ultraviolet protection sheet for 7-inch Wide screen (1 sheet/set). | |
| Spacer | PFXZCM6MP2 | Plate for adjusting installation panel thickness for the 4-inch wide display module. |
| PFXZCM6MP4 | Plate for adjusting installation panel thickness for the 7-inch wide display module. | |
| Display Module/Rear Module Separation Cable (3 m) | PFXZCM6SM3 | Cable for use when installing the rear module and display module apart from the other. |
| Display Module/Rear Module Separation Cable (5 m) | PFXZCM6SM5 | |
| Display Module/Rear Module Separation Cable (10 m) | PFXZCM6SM10 | |
Maintenance Accessories
| Product name | Product number | Description |
|---|---|---|
| Rear Module | PFXSTM6B | Rear module for STM6000 Series |
| Display Module | PFXSTM62TP | Display module for STM-6200WA, 4-inch wide type |
| PFXSTM64TP | Display module for STM-6400WA, 7-inch wide type | |
| Installation Gasket | PFXZCIWG44 | Gasket that provides dust and moisture resistance, for a 4-inch wide display module (1 piece). |
| PFXZCIWG74 | Gasket that provides dust and moisture resistance, for a 7-inch wide display module (1 piece). | |
| DC Power Supply Connector | CA5-DCCNM-01 | Connector for a DC power supply cable. |
| USB Clamp Type A (for 1 port) | PFXZCBCLUSA1 | Clamp to prevent disconnection of USB cable (for 1 port, USB Type A, 5 pieces/set) |
| Display Installation Nut | PFXZGMNT1 | Nut to install the display module (10 pieces/set) |
| Socket Wrench | PFXZGMSW1 | Socket wrench to tighten and loosen the display installation nut |
| Accessories Kit | PFXZCM6KIT | Anti-rotation Tee, USB Clamp Type A, USB Clamp mini-B*1 (1 piece/each) |
*1 USB Clamp mini-B can be used for optional USB micro-B cables.