| RHAA006 |
(Driver Name): (Port Name) Received data has been parity error |
RHAA007 |
(Node Name): (Port Name) Received data has been framing error |
| RHAA008 |
(Driver Name): This machine does not have any Ethernet interface |
| RHAA009 |
(Driver Name): (Port Name) Cannot use the port |
| RHAA010 |
(Driver Name): TCP port number ***** is overlapped, or it is not completed to close the last TCP connection |
| RHAA011 |
(Driver Name): Connection was closed |
| RHAA012 |
(Driver Name): UDP Port number is overlapped |
| RHAA013 |
(Driver Name): COM1: The 9th pin has not been set to VCC (5V Power Supply). Please check your cable or connected equipment. |
| RHAA033 |
(Node Name): Error has been responded for initial communication command (Error Code: (Decimal)[(Hex)]) |
RHAA034 |
(Node Name): Error has been responded for device read command (Error Code: (Decimal)[(Hex)]) |
| RHAA035 |
(Node Name): Error has been responded for device write command (Error Code: (Decimal)[(Hex)]) |
| RHAA036 |
(Node Name): Error has been responded for device read command (Error Code: (Decimal)[(Hex)] There are out of range devices) |
RHAA037 |
(Node Name): Error has been responded for device write command (Error Code: (Decimal)[(Hex)] There are out of range devices) |
| RHAA038 |
(Node Name): Error has been responded for device read command (Error Code: (Decimal)[(Hex)] There are write only devices) |
| RHAA039 |
(Node Name): Error has been responded for device write command (Error Code: (Decimal)[(Hex)] There are read only devices) |
| RHAA040 |
(Node Name): Illegal response for initial communication command |
RHAA041 |
(Node Name): Illegal response for device read command |
| RHAA042 |
(Node Name): Illegal response for device write command |
| RHAA043 |
(Node Name): Checksum error response for initial communication command |
| RHAA044 |
(Node Name): Checksum error response for device read command |
| RHAA045 |
(Node Name): Checksum error response for device write command |
| RHAA049 |
(Node Name): Unknown devices exist in read devices |
RHAA050 |
(Node Name): Unknown devices exist in write devices |
| RHAA051 |
(Node Name): Out of range devices exist in read devices (Address: (Device Address)) |
RHAA052 |
(Node Name): Out of range devices exist in write devices (Address: (Device Address)) |
| RHAA053 |
(Node Name): You cannot read the write only device (Address: (Device Address)) |
RHAA054 |
(Node Name): You cannot write the read only device (Address: (Device Address)) |
| RHAA065 |
(Node Name): TCP connection open error (IP Address: (IP Address)) |
RHAA066 |
(Node Name): UDP target not found (IP Address: (IP Address)) |
| RHAA067 |
(Node Name): Response timed out for initial communication command |
RHAA068 |
(Node Name): Response timed out for device read command |
| RHAA069 |
(Node Name): Response timed out for device write command |
| RHAA070 |
(Node Name): The cable has been disconnected or the target has been powered off |
| RHAA071 |
(Node Name): The extend unit (Unit Name) is not implemented |
| RHAA072 |
(Node Name): Since a buffer was insufficient, the read request was unreceivable |
| RHAA073 |
(Node Name): Since a buffer was insufficient, the write request was unreceivable |
| RHAA084 |
(Node Name): Too many requests to write. The request was ignored. |
| RHAA085 |
(Node Name): Too many requests to read. The request was ignored. |
