Products
Download
Contact us
Back to Top
FAQ
RHAA008(Driver Name): This machine does not have any Ethernet interface.

Error Details
The error message [RHAA008(Driver Name): This machine does not have any Ethernet interface] appeared on the GP3000 screen.

Causes
You may have transferred a project file with the settings that the GP model was set to GP-3xx0, even though it was GP-3xx1 and you have selected an Ethernet-supporting driver in the GP-Pro EX's Device/PLC settings.

Actions

Check the model of your GP to see if it is an Ethernet-supporting model (GP-3xx0) or not. GP-3xx1L and GP-3xx1S do not support an Ethernet connection. If your GP is an Ethernet-supporting model, select the correct model in the Display Unit settings of the GP-Pro EX. Then transfer the screen data to the GP unit.

→ Display Settings

NOTE

To check the model of your GP, see the label on the back of the GP unit.

↑Back to page top ← Return to the previous page
FAQ for use | Protection of Personal Information | Trademark Acknowledgments | About Intellectual Property Rights | Terms of Use
Copyright (C) 2005- Schneider Electric Japan Holdings Ltd. All Rights Reserved.