 |
|
| RHAA066(Node Name): UDP target not found (IP Address: (IP Address)) |
|
Error Details
|
The error message [RHAA066(Node Name): UDP target not found (IP Address: (IP Address))] appeared on the GP3000 screen. |
Causes
|
| 1. |
The IP address of the device/PLC and the port number are not recognized. |
| 2. |
The power of the hub or device/PLC are not on, or the cable is unplugged. |
|
Actions
|
| 1. |
Check the settings of the IP address and the port number on both of the GP and the device/PLC.
|
| 2. |
Check if the network environment is normal. Specify the cause via procedures such as directly connecting the PC, GP and device/PLC, and then checking if the IP address is recognized via the PING command.
|
|
|
|
