Panel Cut Dimensions
Based on the panel cut dimensions, open a mount hole on the panel.

A | B | C |
---|---|---|
22.5 mm (+0/-0.3
mm) (0.88 in [+0/-0.01 in]) |
4.0 mm (+0/-0.2 mm) (0.15 in [+0/-0.007 in]) |
30.0 mm (+0/-0.2 mm) (1.18 in [+0/-0.007 in]) |
Panel thickness recommended range:
Panel material | Thickness range (D) |
---|---|
Steel | 1.5... 6.0 mm (0.06... 0.23 in) |
Glass fiber reinforced plastics (minimum GF30) | 3.0... 6.0 mm (0.12... 0.23 in) |
About Spacer
If the panel thickness does not meet the conditions for use with the product, you can use an optional spacer.
Product number | PFXZCM6MP2 | PFXZCM6MP4 |
---|---|---|
Spacer size (W x H x D) | 145 x 105 x 2 mm(5.71 x 4.13 x 0.08 in) | 204 x 140 x 2 mm (8.03 x 5.51 x 0.08 in) |
Spacer material | Stainless steel | Stainless steel |
The thickness and material of panels you can use the spacer are as follows.
Panel material | STM-6200WA | STM-6400WA |
---|---|---|
Steel | 1 ... 1.5 mm (0.04 ... 0.06 in) | 1 ... 1.5 mm (0.04 ... 0.06 in) |
Glass fiber reinforced plastics (minimum GF30) |
1 ... 3 mm (0.04 ... 0.12 in) | 2 ... 3 mm (0.08 ... 0.12 in) |
Other plastic | 1 ... 3 mm (0.04 ... 0.12 in) | not possible |