- Connection Device Samples
 
  Brushless DC Motor Connection  
  You can connect GP4000/GP3000/LT3000 Series to a motor driver to operate and surveil a motor.
 
 
  Burner Controller Connection  
  You can connect burner controllers BC-R35 Series (Time-limited pilot) manufactured by Azbil Corporation with GP4000/LT4000M Series, and BC-R35 Series can be used as a monitoring tool (Time-limited pilot).
 
 
  Electric Actuator Connection  
  You can connect GP4000 series to an electric actuator “LEC series” made by SMC Corporation with RS-485 communication. Up to 16 actuators can be connected.
 
 
  Hand Nutrunner Connection  
  You can connect GP4000 series to a hand nutrunner “Handy2000 series” made by Estic Corporation via Ethernet (MODBUS TCP) communication.
 
 
  High-Accuracy Position Sensor Connection   
  You can connect High-Accuracy Position Sensors K1G Series manufactured by Azbil Corporation with GP4000/LT4000M Series, and K1G Series can be used as a setting/management support tool.
 
 
  Image Processing System Connection  
  You can connect GP4000 series to “In-Sight Vision System ” made by Cognex Corporation and change the parameters of In-Sight.
 
 
  Industrial Bar Code Reader  
  The sample project file can be used for achieving the tuning operation and setting change of DataMan300 Series from GP Series (Medium-sized models) via Ethernet connection.
 
 
  Inverter Connection  
  You can connect GP4000 series to the inverter and display a state of the inverter.
 
 
  Motion Adapter Connection  
 

You can connect GP4000 series to a robot-controller “MA100” made by YASKAWA Electric Corporation and maintain a servo connected to each axis.
 
 
  PLC / Machine Controller Connection Sample
  With this sample, you can get the detailed information of PLC or the Machine Controller by using the driver which is improved and newly developed for GP4000 Series.
 
 
  Robot Controller Connection  
 

You can connect HMI to a robot-controller and display a state of a robot.

 
 
  ROBO Cylinder Connection  
  You can connect one ROBO Cylinder or more using the MODBUS SIO master driver for GP4000 Series.
 
 
  Servo Drive Connection  
  You can connect GP4000 series to the servo drive made by Yaskawa Ekectric Corporation and maintain servo controllers.
 
 
  Servo Nutrunner Connection  
  You can connect GP4000 series to a servo nutrunner made by Estic Corporation via Ethernet (MODBUS TCP) and serial communication.
 
 
  Single-axis Robot Positioner Connection  
  You can connect GP4000 series to a robot-positioner “TS-X/TS-P/TS-S Series ” made by Yamaha Motor Co., Ltd. and display a state of the robot.
 
 
  Stepping Motor Connection  
  You can connect GP4000/GP3000/LT3000 Series to a motor driver to operate and surveil a motor.
 
 
  Temperature Controller Module Connection  
  With this sample, you can get the detailed information of PLC or the Machine Controller by using the driver which is improved and newly developed for GP4000 Series.
 
 
  X-SEL/PSEL/SSEL/ASEL Connection
  You can connect GP4000 Series to the controllers "X-SEL/PSEL/SSEL/ASEL" manufactured by IAI Corporation with serial communication.
 
About Login | Change Registered Info | FAQ for use | Protection of Personal Information | Trademark Acknowledgments | Terms of Use
Copyright (C) 2005- Schneider Electric Japan Holdings Ltd. All Rights Reserved.