13.1 Settings Menu

Turning the Lamp ON/OFF with the ON/OFF Bit

Turning Multiple Bits ON/OFF (Up to 5 States) Overview 13.3 Turning Multiple Bits ON/OFF (Up to 5 States) Steps 13.3.1 Procedure - Turning Multiple Bits ON/OFF (Up to 5 States)
Use a single lamp on the display unit to display in different colors the ON/OFF states of four different bit addresses.

Turning Multiple Bits ON/OFF (Up to 5 States)

Use a single lamp on the display unit to display in different colors the ON/OFF states of four different bit addresses.

Changing Multiple Bits (Up to 16 States) Overview 13.4 Changing Multiple Bits (Up to 16 States) Steps 13.4.1 Procedure - Changing Multiple Bits (Up to 16 States)
Use a single lamp on the display unit to display in different colors the ON/OFF states for a combination of up to four bit addresses.

Changing Multiple Bits (Up to 16 States)

Use a single lamp on the display unit to display in different colors the ON/OFF states for a combination of up to four bit addresses.

Changing Word Address Bits (Bit Settings) Overview 13.5 Changing Word Address Bits (Bit Settings) Steps 13.5.1 Procedure - Changing Word Address Bits (Bit Settings)
Use a single lamp on the display unit to display in different colors the ON/OFF states for a combination of up to four bit addresses.

Changing Word Address Bits (Bit Settings)

Use a single lamp on the display unit to display in different colors the ON/OFF states for a combination of up to four bit addresses.

Change When Word Address Value Changes Overview 13.6 Change When Word Address Value Changes Steps 13.6.1 Procedure - Change When Word Address Value Changes
Use a single lamp on the display unit to display in different colors, the value (0 to 2555) stored in a PLC word address.

Change When Word Address Value Changes

Use a single lamp on the display unit to display in different colors, the value (0 to 2555) stored in a PLC word address.