A single lamp can display in different colors the combined ON/OFF states of up to 4 bit addresses from a connected device/PLC, resulting in 16 states. By setting up different colors, the combined 16 states can be displayed on a single lamp.
If the state display is set to [Interlock Feature] or [Delay Feature], then [Show Interlocked Condition] has the highest priority followed by [Show In-Delay Status]. Consequently, the lamp may not display as expected. You can access this option from the [Switch/Lamp] dialog box, select the [Switch Common] tab and then select [Detail].
The four bit addresses specified to one lamp can be the bit addresses in different devices/PLCs.
