From the [Parts (P)] menu, select [Trigger Action]. The [Trigger Action List] dialog box appears. Click [Create] or [Edit] to display the following settings dialog box.
The component tray displays registered trigger action parts in the order they are created. To change the order of D-script parts in the component tray, change the ID number for registered parts, then from the [Edit] menu select [Auto-Align Trays]. You can change ID settings by double-clicking parts in the component tray to display the edit dialog box.
Parts ID
Parts are automatically assigned an ID number.
Trigger Action parts ID: TR_**** (4 digits)
The letter portion is fixed. You can change the number to within the range of 0000 and 9999.
Comment
The comment for each Part can be up to 20 characters.
Action
Operate the specified bit address according to the change of state of the trigger bit address.
Operate the specified word address according to the change of state of the trigger bit address.
Screen Change is executed according to the change of state of the trigger bit address.
When the trigger bit address turns ON, drawing action is executed.
When using the IPC Series or SP5000 Series Open Box, you can run the specified action based on changes to the state of the trigger bit address.