- Parts Samples -
3D Real Calculator        
With this part, numerical calculation can be done like an alpha calculator on operator interface.    
Movable Keypad     Popup Keypad  
This sample feature allows you to move the keypad to the location where you touch on the screen.   You can call a popup keypad by touching the display when you need to enter data.
Numeric Keypad Feature     Pseudo Function Switch  
This is the feature to input data by a self-created numeric keypad.   This sample program presents function switches imitatively, that are originally hard switches.
OK/Cancel Choice Window Screen     Data Display Confirmation Window  
A confirmation pop-up menu window appears when switching the screens.   This sample pop-up window is used to confirm to write a value to a data display.
  Data Display Address Offset   Pop-Up Message Feature  
  This sample is for viewing multiple addresses on one data display. This is the feature to display a pop-up message when operating a switch or inputting data to confirm the operation by touching the operation switch.
Relative Conversion of Value Input
  Numeric Converter  
This is the sample to convert the value, which is inputted on the screen, relatively in GP with the logic function of GP3000 Series, and pass it to the device/PLC   This is the sample display to convert the input data to the value in another data type (binary/octal/decimal/hexadecimal).
  Numeric Display with Unit     Operation Data Display  
  This is the sample program to display the numeric display by unit.   This sample performs arithmetic operation and logical operation by the operation feature of Data Display.
  Data Display Methods     Action Switch with Multi-Conditions  
  You can view the methods to set display numbers on Data Display.   This sample lights the lamp depending on various logical operation results of the bit and the word.
Delay Timer Feature   Digital Switch  
This sample is a delay timer with the internal logic (the control function) of GP3000 Series. This is the digital switch corresponding to the decimal data type.
Tab Switch Feature     Off Delay Switch  
This is the feature to switch screens on a base screen by tab switches .   This sample program switches the labels during Off Delay.
  Show/Hide Switch Control   Visible Animation Feature  
  This is the sample program to control a bit switch shows another bit switch. This is the feature to materialize visible animation (visible/invisible).
  Common Switch     State Switch  
  You can turn on and off all the bits in one word by using a bit switch.   This is the sample program to change the state by 1, or to switch the image, by touching the switch.
  Picture Display   Group Screen Change  
  This sample program shows or hides a figure that you have created on another screen according to the change of the state of the specified bit address. This is the sample to memorize and call performances of screen change by a group with GP3000 Series.
Stopwatch Screen   High Functional Switch/Lamp Feature  
This is a sample of a stopwatch to measure up to 60 minutes in 1/100 second. 3 modes of lap time, split time, and elapsed time can be displayed as well as commercial stopwatches. This feature materializes the multifunction feature, the delay action, address auto-add/subtract, and n state lamp by using Switch/Lamp feature.
  Blinking after Specified Time   Countdown Timer  
  This is the sample program to start blinking after the specified time if the displaying data is not changed. This timer counts down the time (maximum 60 minutes) in 1/100 second.
About Login | Change Registered Info | FAQ for use | Protection of Personal Information | Trademark Acknowledgments | Terms of Use
Copyright (C) 2005- Schneider Electric Japan Holdings Ltd. All Rights Reserved.