>PLCs >YASKAWA Electric Corporation MP Ethernet/MECHATROLINK Driver
Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.
Terms of Use
Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
Who, uses or plans to use SEJH's products, may download and use any file.
Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
Please use this service at your own risk.
If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
Files are subject to deletion, or modification of the contents or specifications without notice.
Please confirm that the downloading file size completely accords
with the download file size shown.
If the file sizes do not match, delete the file without decompressing and then download the same file once again.
The required versions of software for this driver installer are as follows. GP-Pro EX Ver. 2.10.000 or later
Pro-Server EX Ver. 1.30.000 or later You can check your version by "Help" function -> "Version Info".
Supported Devices
MP3000 Series
MP2000 Series
Sigma-5 Series*1
Sigma-7 Series*1
V1000 Series*2
A1000 Series*2
R7G4HML3-6-LC2 (I/O: M-System Co., Ltd.)*3
K1G (I/O: Azbil Corporation)*3
AZ (Stepping: Oriental Motor Co., Ltd.)*3
R7G4HML3-6-STYVS1 (I/O: M-System Co., Ltd.)*3
R7G4HML3-6-LC2A (I/O: M-System Co., Ltd.)*3
Sigma-7C Series
*1 It is MECHATROLINKⅡ / MECHATROLINKⅢ connection via MP3000/MP2000 Series.
*2 It is MECHATROLINKⅡ connection via MP3000/MP2000 Series.
*3 It is MECHATROLINKⅢ connection via MP3000/MP2000 Series.
Related Models
Required versions depend on models.
Please check "Supported Models / Version" for the required versions of GP-Pro EX.
Required driver versions for different models are listed below.
Device Data Copy Tool Ver. 1.00.00 or later. * The support version is depends on the kind of the connection device.
Device/PLC Connection Manual
For details, please read the following PDF: yas_mpee.pdf ( 6,885KB )
For general information regarding Device connection and documentation conventions, please refer to "Device/PLC Connection Manual".
Updated Contents
Ver. 1.19.12 (Dec. 16, 2016)
The following functions were added.
Sigma-7C series is supported. * To use Sigma-7C (controller section) series with Device Data Copy Tool, Device Data Copy Tool Ver. 1.08.03 or later is required.
How to Install (*This is a self-extracting file.)
Please make sure that the supported software is installed. Prior to installion, close all applications running on a PC including any resident programs such as a virus detection program, etc.
Click on the file name above to start downloading the file.
After download is complete, double-click on the downloaded file to start installation.
Follow the instructions on the screen.
After installation, start GP-Pro EX/Pro-Server EX.
Select [YASKAWA Electric Corporation] for "Manufacturer" and [MP Ethernet/MECHATROLINK] for "Series" in [Device/PLC] settings of [System Settings] on the [Project] menu.
*
When using the driver, be sure to refer to the Device Connection Manual above (PDF file).
Also, please refer to "Device/PLC Connection Manual" for general information regarding device connection and documentation conventions.
Update History:
[Ver. 1.19.12] (Dec. 16, 2016)
The following functions were added.
Sigma-7C series is supported. * To use Sigma-7C (controller section) series with Device Data Copy Tool, Device Data Copy Tool Ver. 1.08.03 or later is required.
[Ver. 1.19.11] (Apr. 8, 2016)
The following functions were added.
R7G4HML3-6-LC2A of M-System Co., Ltd. is supported.
Virtual Memory Space device of Remote I/O of M-System Co., Ltd. is supported.
[Ver. 1.19.10]
Az of Oriental Motor Co., Ltd. is supported.
[Ver. 1.19.09]
R7G4HML3-6-STYVS1 of M-System Co., Ltd. is supported.
[Ver. 1.19.08] (Oct. 2, 2015)
The driver name was changed from MP/INVERTER/SERVO Ethernet to MP Ethernet/MECHATROLINK.
The following functions were added.
M-System Co., Ltd. R7G4HML3-6-LC2 is supported.
Azbil Corporation K1G is supported.
[Ver. 1.19.06] (Apr. 2, 2015)
The following issue was fixed.
When driver version is Ver. 1.19.05, Device Data Copy Tool does not operate properly in WinGP.
[Ver. 1.19.05] (Sep. 22, 2014)
The following function was added:
Sigma-7 series is supported.
[Ver. 1.18.04] (Mar. 20, 2014)
The following function was added:
MPU-01 and CPU201(SUB) are supported.
* To use MPU-01/CPU201(SUB) series with Device Data Copy Tool, Device Data Copy Tool Ver.1.05.02 or later is required.
Device Data Copy Tool is included in GP-Pro EX Ver. 3.60.000.
The following issue was fixed:
"Wait To Send" is not operated when the UDP communication is used.
[Ver. 1.17.03] (Apr. 6, 2012)
The following issue was fixed:
The connection device data transfer function "Ver. 1.02.00 or earlier" does not operate normally.
* To use Device Data Copy Tool, the connection device data transfer function “Ver. 1.04.02 or later” or "Ver. 1.02.00 or earlier" is required. "Ver. 1.03.01" cannot be used.