Products
Download
Contact us
Back to Top

Driver Download

>Device Data Copy Tool

Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.

Terms of Use
  1. Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
  2. Who, uses or plans to use SEJH's products, may download and use any file.
  3. Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
    However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
  4. This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
  5. Please use this service at your own risk.
  6. If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
  1. Files are subject to deletion, or modification of the contents or specifications without notice.
  2. Please confirm that the downloading file size completely accords with the download file size shown.
  3. If the file sizes do not match, delete the file without decompressing and then download the same file once again.
 Download

Note:

→ Precautions for adding a new driver onto Windows Vista®/ Windows® 7
→ Precautions for adding a new driver at Daylight Saving Time

Title Device Data Copy Tool
File Name DataCopy.exe
File Size 33,731KB
Applicable Software GP-Pro EX Ver. 2.20.000 or later
To check your version, go to the "Help" menu -> "Version Info".
Compatible OS
  • Windows XP 32bit OS (any Service Pack, any edition)
  • Windows Vista 32bit OS (Service Pack 2 or later, any edition)
  • Windows 7 32bit/64bit OS (Service Pack 1 or later, any edition)
  • Windows 8.0 32bit/64bit OS (any Service Pack, any edition)
  • Windows 8.1 32bit/64bit OS (any Service Pack, any edition)
  • Windows 10 32bit/64bit OS (Home, Pro, Enterprise)
SP5000 Series Ver. 1.05.02 or later Ver. 1.02.03 or later
IPC Series for WinGP Ver. 1.10.00 or later Ver. 1.00.00 or later
General PCs for WinGP Ver. 1.10.00 or later Ver. 1.00.00 or later
Manual For details, please read the PDF file: yas_tsee.pdf ( 392KB ) For details, please read the PDF file: tsm_tsee.pdf ( 739KB )
Updated Contents

[Ver. 1.08.04] (Mar. 30, 2017)

The following bug has been fixed.
  • If the data transfer is repeated, the HMI may freeze.

[Ver. 1.03.03] (Sep. 5, 2014)

  • Now supports VGA display.
    * To use a VGA display Ver. 4.02.000 or later of GP-Pro EX is necessary.
Update History

[Ver. 1.08.03] (Dec. 16, 2016)

  • Sigma-7C is supported.(The Display communicates with the S-7C controller section.)

[Ver. 1.07.03] (Apr. 08, 2016)

  • Added support for individual transfer.

[Ver. 1.06.02] (Sep. 5, 2014)

  • Added support for new transfer files. (Maintenance Monitor Setting, FTP Client definition.)

[Ver. 1.05.02] (Aug. 22, 2012)

  • MPU-01, CPU201(SUB) are supported

[Ver. 1.04.02] (Apr. 6, 2012)

  • Compressed project file for MP2000 Series is supported.
  • The following issue is fixed:
    When a communication driver Ver. 1.16.02 or earlier is used, GP cannot operate normally.

[Ver. 1.03.01] (Mar. 9, 2012)

  • MP3000 Series is supported.
  • Compressed project file for MP3000 Series is supported.
  • The following issues are fixed:
    - Touch operator interface cannot dump files when referring to nonexistence diagrams on a program.
    - Returning to driver selection repeatedly in the menu screen may disable the touch operation.

[Ver. 1.01.00] (Jul. 27, 2010)

  • Selecting the register data transfer when loading is supported.
  • MECHATROLINK-III is supported.
  • GP4100 Series is supported.
  • GP4000M Series is supported.
  • GP4000 Series is supported.

[Ver. 1.00.00]

New

[Ver. 1.02.03] (Mar. 9, 2012)

  • The following issues are fixed:
    - Although CPU stops when a data file is downloaded, the CPU stop confirmation message may be displayed.
    - Although CPU is in the RUN status when a data file is downloaded, download is performed without displaying the CPU stop confirmation message and the communication error may occur.

[Ver. 1.00.02]

  • GP4000 Series is supported.
  • The following issue is fixed:
    If "Subroutine Command", "Task Command" and "Interrupt Command" are used for a ladder program, a sequence error occurs after data is transferred to a PLC.
  • When a ladder program is uploaded, data is read in a state where the L/H of the 3rd or later address values in the T/C setting value is reversed.

[Ver. 1.00.01]

  • GP4100 Series is supported.
  • GP4000M Series is supported.

[Ver. 1.00.00]

New

How to Install (*This is a self-extracting file.)

  1. Please confirm that the applicable software is installed.
    Prior to installion, close all applications running on a PC including any resident programs such as a virus detection program, etc.
  2. Click on the file name above to start downloading the file.
  3. After download is complete, double-click on the downloaded file to start installation.
  4. Follow the instructions on the screen.
 

Last Updated : Mar. 30, 2017
Posted : Jul. 27, 2010

| Return to Top | | Back | HOME |
FAQ for use | Protection of Personal Information | Trademark Acknowledgments | About Intellectual Property Rights | Terms of Use
Copyright (C) 2005- Schneider Electric Japan Holdings Ltd. All Rights Reserved.