GP2000 Series
   About the products for the abolition of UL1604 standard

GP2500-LG41-24V Specifications (End of sale: 2013/9/30)

Functional Specifications

Model (Global Code)GP2500-LG41-24V (PFXGP2500LD)
Type Monochrome LCD
Colors Black and White (2 Shades)/ Black and White (8 Shades)
(software control)
Backlight CCFL (Service life: more than 50,000 at 24 hr. operation)
Resolution 640 × 480 pixels
Effective Display Area (mm) 211.2(W) × 158.4(H)
Brightness Control 4 levels of adjustment available via touch panel
Contrast Control 8 levels of adjustment available via touch panel
Language Character Sets ASCII: (Code page 850) Alphanumeric (incl. European characters)
Chinese: (GB2312-80 codes) simplified Chinese fonts
Japanese: ANK 158, Kanji : 6962 (JIS Standards 1 & 2)
Korean: (KSC5601 - 1992 codes) Hangul fonts
Taiwanese: (Big 5 codes) traditional Chinese fonts
Text8 × 8 dots 80 char. × 60 rows
8 × 16 dots 80 char. × 30 rows
16 × 16 dots 40 char. × 30 rows
32 × 32 dots 20 char. × 15 rows
Character Sizes*1 8 × 8 dots, 8 × 16 dots, 16 × 16 dots, 32 × 32 dots
Font Sizes Height can be expanded 1 to 8 times.
Width can be expanded 1/2 *2, 1 to 8 times.
Application Memory FLASH EPROM 4MB
Data Backup Memory 256KB SRAM - uses lithium battery*3
Serial Interface Asynchronous Transmission: RS232C/ RS422
Data Length: 7 or 8 bits
Stop Bit: 1 or 2 bits
Parity: None, Odd or Even
Data Transmission Speed: 2400 to 115.2kbps, 187.5Kbps*4
Serial Interface
Asynchronous Transmission Method: RS232C,
Data Length: 7 or 8 bits,
Stop Bit: 1 or 2 bits,
Parity: None, Odd or Even,
Data Transmission Speed: 2400 to 38400 bps
Network Interface Ethernet (IEEE802.3, 10BASE-T)
CF Card Interface 1 slot
External CF Card
CF Card Front Maintenance Unit Connector
Sound Output
External Speaker Connection (Terminal Block)
Monaural 1CH
Speaker Output 70mW (Rated Load: 8Ω, Frequency: 1kHz)
Sound Line Out Output 2.7Vp-p (Rated Load: 10kΩ)
Wire Gauge: AWG28 to AWG16
Reset Input
Remote Reset Input: 1 point,
Input Voltage: DC24V ±10%,
Input Current: 4mA (TYP), Min. Input Pulse Width: 2ms
Operating Voltage: (When ON) Min. DC21.1V/ (When OFF) Max. DC3V
Isolation Method: Photocoupler Isolation
Output Output: 3 Points
(RUN Output: 1 point, System Alarm Output: 1 point, External Buzzer Output: 1 point)
Rated Voltage: DC24V,
Max. Rated Current: 50mA/ point,
Wire Gauge: AWG28 to AWG16
Printer Interface Compatible with NECPC-PR201/PL , EPSON ESC/P24-J84(C), HP Laser Jet PCL 4 command printer*5
Tool Connector Asynchronous TTL level nonprocedure command I/F

Used for transferring data between the GP application software and the GP.
Used for data transfer with the 2-Port feature.

Used for a variety of devices, including a bar-code reader.
  1. The display font will differ depending on which (language) character, or which size you select.
  2. Only available when using "1/2 Byte Character" settings via software. (Only Japanese, Chinese, Taiwanese and Korean characters.)
  3. A Lithium battery's lifetime is:
    10 years when the battery's ambient temperature is under 40℃
    4.1 years when the battery's ambient temperature is under 50℃
    1.5 years when the battery's ambient temperature is under 60℃
    When used for backup:
    Approximately 60 days, with a fully charged battery
    Approximately 6 days, with a half-charged battery
  4. SIEMENS SIMATIC S7-200/300/400 series (MPI port only). Please contact your Pro-face sales representative for supported models and other details.
  5. Printers with only Windows drivers cannot be used. However, certain types of printers with both Windows and DOS drivers can be used. For details, contact your local Pro-face distributor.

General Specifications

Model (Global Code)GP2500-LG41-24V (PFXGP2500LD)
ElectricalRated Voltage DC24V
Rated Voltage Range DC19.2V to DC28.8V
Power Consumption 50W or less
Allowable Voltage Drop 10ms or less
(Actual drop must be less than 1 second)
Voltage Endurance AC1000V, 20mA for up to 1 minute
(between charging and FG terminals)
Insulation Resistance 10MΩ or higher at DC500V
(between charging and FG terminals)
EnvironmentalAmbient Operating
0 - 50℃
Storage Temperature -20 - 60℃
Ambient Humidity 10 - 90% RH
(non-condensing wetbulb temperature 39℃ or less)
10 - 90% RH
(non-condensing wetbulb temperature 39℃ or less)
Vibration Resistance Compatible with IEC61131-2
When vibration is NOT continuous:
10Hz to 57Hz 0.075mm, 57Hz to 150Hz 9.8m/s2
When vibration is continuous:
10Hz to 57Hz 0.035mm, 57Hz to 150Hz 4.9m/s2
X, Y, Z directions for 10 times (80min.)
Noise Immunity Noise Immunity:1500Vp-p Pulse Duration: 1µs Rise Time: 1ns
(via noise simulator)
Corrosive Gasses Free of corrosive gasses
StructuralGrounding 100Ω or less, or your country's applicable standard
Ratings Equivalent to IP65f (JEM1030), NEMA#250 TYPE 4X/12*7
External Dimensions W317mm[12.48in.] × H243mm[9.57in.] × D58mm[2.28in.]
Weight 3.5kg (7.7lb) or less
Cooling Method Natural air circulation
  1. When installing the GP in a cabinet or enclosure, the term “ambient operation temperature” indicates the cabinet or enclosure’s internal temperature.
    The LCD displays may occasionally blur when they are used for hours at over 40℃ ambient operating temperature. This is a temporary phenomenon. After the temperature returns to normal, the display will be restored to normal. The GP's operation will not be affected even though the display is blurred.
  2. The degree of protection provided by these products is equivalent to IP65f, however their performance cannot be guaranteed for every environment. Be sure to confirm your work environment requirements prior to installation.


GP2500-TC*1* 外形寸法図