Performance Specifications
| Advanced Box | Standard Box | |||
|---|---|---|---|---|
| Core i7 | Core i5 | Celeron | Core i3 | |
| CPU | Core™ i7-8665UE | Core™ i5-8365UE | Celeron® 4305UE | Core™ i3-8145UE |
| Base frequency | 1.70 GHz | 1.60 GHz | 2.0 GHz | 2.20 GHz |
| Max turbo boost frequency | 4.40 GHz | 4.10 GHz | 2.0 GHz | 3.90 GHz |
| L2 cache | 8 MB | 6 MB | 2 MB | 4 MB |
| Core number | 4 | 4 | 2 | 2 |
| Thread number | 8 | 8 | 2 | 4 |
| Main memory | 260-pin SO-DIMM socket x 2, DDR4-2400 (Up to 16 GB/socket, up to 32 GB for 2 sockets) | 260-pin SO-DIMM socket x 2, DDR4-2133 (Up to 16 GB/socket, up to 32 GB for 2 sockets) | 260-pin SO-DIMM socket x 2, DDR4-2400 (Up to 16 GB/socket, up to 32 GB for 2 sockets) | |
| Video memory | Shared memory (UMA) Maximum allocation size: Automatic allocation of up to half the installed main memory |
|||
| Storage slot | M.2 SSD SATA x 1 (Disk 0) 2.5-inch SATA (HDD/SSD) x 2 (top: Disk 2, bottom: Disk 1) SATA speed: 6 Gb/s, 3 Gb/s, 1.5 Gb/s |
M.2 SSD SATA x 1 (Disk 0) 2.5-inch SATA (HDD/SSD) x 1 (Disk 1) SATA speed: 6 Gb/s, 3 Gb/s, 1.5 Gb/s |
||
| Expansion slot*1*2 | PCI x 1 + PCIe x 1, PCIe x 2 or PCI x
2 PCI card size: Short length PCIe card size: Half length PCI slot: Revision 3.0, 32 bit bus, 3.3 Vdc PCIe slot: Revision 3.0, 1 Link (x1)*3 |
— | ||
| Graphics accelerator | Intel® UHD Graphics 620 (built in CPU) | Intel® UHD Graphics 610 (built in CPU) | Intel® UHD Graphics 620 (built in CPU) | |
| Security chip | TPM 2.0 | |||
| BIOS | UEFI BIOS | |||
| Operating system | Windows® 10 IoT Enterprise 2019 LTSC (64bit) | |||
| Watchdog timer*4 | Timeout setting from either 1 to 255 seconds, or 1 to 255 minutes, is possible (set up using API) | |||
| Buzzer | Yes | |||
*1 The total power consumption of PCI/PCIe cards can be up to 12 W, regardless of whether one or two cards are installed.
*2 For dimensions of PCI/PCIe cards that can be installed, refer to PCI/PCIe Card Installation.
*3 The PCIe connector is a x4 Link, edgeless type. However, only 1 Lane is connected for signals.
*4 The watchdog
timer is supported by products with the following system version.
BIOS: WAR02 or later
OS Base: 2.0 or later
You can check the system version from the Launcher. Refer to System . To use the watchdog timer on a product with a WAR01 BIOS, and OS Base 1.0, the BIOS and System Monitor must be updated. Follow the steps below to update.
-
BIOS: Contact customer support for instructions on how to update.
-
System Monitor: Download and install the driver(PFXPHMIP6_Driver_Installer_Ver.x.x.zip) and the utility (PFXPHMIP6_Utility_Installer_Ver.x.x.zip) from the PS6000 and FP6000 Series Utility download page in the following URL.
https://www.pro-face.com/trans/en/manual/1085.html