|
Error No. |
Error Message |
Cause and Solution |
Reference |
| RAAA110 |
Remote PC Access error. Unable to recover. |
An internal initialization error or system error occurred. Restart the GP unit, or review the screen settings. |
GP-Pro EX Reference Manual
[System Menu - Offline, CF/USB (or SD/USB), Error, Reset] |
| RAAA111 |
Unable to certify Remote PC Access server. |
The password is invalid. Check if the password matches the password specified on the server PC. |
GP-Pro EX Reference Manual
[Display or Operate a Computer from the Display Unit] |
| RAAA112 |
Failed to connect to Remote PC Access server. |
No server PC is found, or the connection to the server PC is not established.
Check if the IP address matches with that for the server PC.
Check if the server PC is active.
Check the settings on the server PC.
Check if the server PC Firewall is enabled. |
| RAAA113 |
Connecting to Remote PC Access server. |
The previous disconnection process is not completed.
Wait for a while (75 seconds maximum), and then retry connecting to the server. |
--- |
| RAAA114 |
Missing remote PC access license key code. |
With GP-Pro EX, the RPA function key code has not been set up.
To use the RPA function, you must purchase a dedicated RPA key code (model: EX-RPA). Obtain one key code for each display that uses the RPA function. |
GP-Pro EX Reference Manual
[Setting up GP-Viewer EX or Remote PC Access License] |
