Otasuke Pro! > FAQ > GP3000 > Connection devices that the Ladder Monitor is available with and versions of the programming tools

FAQ

Connection devices that the Ladder Monitor is available with and versions of the programming tools

Supporting models

■ Mitsubishi Electric

Maker	Series	CPU	Link Interface or CPU Direct	Communication Method *1	Device Name for GP-Pro EX *2
Mitsubishi Electric Corporation	Q Series	Q02 Q02H Q06H Q12H Q25H	RS-232C port on CPU unit	-	Mitsubishi Electric Q Series CPU Direct (Ver.1.13.07 or later)
			QJ71E71	Ethernet （UDP）	Mitsubishi Electric Q/QnA Series Ethernet (Ver.1.12.04 or later)
			QJ71E71-B2	Ethernet （UDP）
			QJ71E71-100	Ethernet （UDP）
	Q Series (A Mode)	Q02CPU-A Q02HCPU-A	CPU Direct	RS232C or RS422/485 (4 wire)	Mitsubishi Electric A Series CPU Direct (Ver.1.13.02 or later)
			A1SJ71C24-R2 A1SJ71C24-R4 A1SJ71UC24-R2 A1SJ71UC24-R4		Mitsubishi Electric A Series Computer Link (Ver.1.12.02 or later)
	AnA Series	A2ACPU A2ACPU-S1 A3ACPU A2UCPU A2UCPU-S1 A3UCPU A4UCPU	CPU Direct	RS232C or RS422/485 (4 wire)	Mitsubishi Electric A Series CPU Direct (Ver.1.13.02 or later)
			AJ71C24-S6 AJ71C24-S6 AJ71C24-S6		Mitsubishi Electric A Series Computer Link (Ver.1.12.02 or later)
		A2USCPU A2USCPU-S1	CPU Direct	RS232C or RS422/485 (4 wire)	Mitsubishi Electric A Series CPU Direct (Ver.1.13.02 or later)
			A1SJ71C24-R2 A1SJ71C24-R4 A1SJ71UC24-R2 A1SJ71UC24-R4		Mitsubishi Electric A Series Computer Link (Ver.1.12.02 or later)

Mitsubishi Electric Programming Tool

MELSOFT GX Series GX Developer Ver.8

IMPORTANT

If the driver version of the connected device, that is installed in GP-Pro EX is older than that listed in the table above, the ladder monitor will not function normally.
Upgrade the driver to at least the version listed in the table before using the unit.
The update module can be downloaded from our website "Otasuke Pro!"
> PLC Drivers

NOTE

-	This information is as of November 2008.
-	Instructions that can be monitored using this function are those supported by the MELSOFT GX Series GX Developer Ver.8 programming tool by Mitsubishi Electric Corporation.
*1	The communication method changes depending on the type of the link unit, cables used, etc. For the details, see the driver manual.
*2	The driver version can be checked by viewing [Peripheral List] in the System Settings window of GP-Pro EX, or [Driver Version] in the Offline mode on the display unit.

■ OMRON

↑Back to page top

← Return to the previous page