Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.
Terms of Use
Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
Who, uses or plans to use SEJH's products, may download and use any file.
Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
Please use this service at your own risk.
If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
Files are subject to deletion, or modification of the contents or specifications without notice.
Please confirm that the downloading file size completely accords
with the download file size shown.
If the file sizes do not match, delete the file without decompressing and then download the same file once again.
Download
Note:
This program should be run on a PC in which Pro-Server with Pro-Studio Ver. 4.13 and OPC Server for Pro-Server have been installed.
* To use the OPC Server for Pro-Server Ver. 4.13 functions, the following files should, also, be updated.
When updating OPC Server for Pro-Server, pay attention to the following note.
-
If your OS is WindowsNT®, Windows®2000, or Windows®XP, update OPC Server for Pro-Server using the same account as the one used in installing Pro-Server.
Module for updating
OPC Server for Pro-Server Ver. 4.13
Features
1.
The following function is improved.
-
Performance of
add/remove items has been improved.
-
This version allows
you to set the read type (cache/device)
of the read method of OPCGroup
Object IOPCAsyncIO2 Interface
using INI file.(Default is cache.)
For more details of the setup method, refer to the attached sheet "How
to Set Read Method(PDF/32KB)".
2. The following issues were resolved.
-
In case "."(dot)
is included in the path of OPCServer,
settings in the setup file (OPCPRO.INI)
are not enabled.
-
When no group
was registered in the server
and GetStatus method is called,
the state of the server does
not turn "RUNNING".
-
Registering the
symbol and the device of a node
name whose first character is
not alphabetical causes an error.
-
When an unregistered
ItemID is specified and GetItemProperties
method is called, essential items
ItemValue and ItemQuality gets "Unsupported" error.
Module Installation (This is a self-extracting file)
Confirm that Pro-Server with Pro-Studio Ver. 4.13 and OPC Server for Pro-Server is installed in your PC.
Since this software update module only overwrites the modified sections of the program (a portion of the program), do not uninstall Pro-Server with Pro-Studio and OPC Server for Pro-Server from your PC.
Be sure to quit Pro-Server with Pro-Studio and OPC Server for Pro-Server before installing this module.
Installation Procedure
Click on the link "OPCServerV413(Local_Remote).exe" or "OPCServerV413(In-Process).exe" in the box above to download the file to the desired folder.
After the download is completed, double-click on the "Pro-ServerV413.exe" file to start installation.
Follow the installer program's directions.
When installation is completed normally, " Setup completed." is displayed. If there are any problems and installation can not be completed, contact our company.
