Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.
Terms of Use
Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
Who, uses or plans to use SEJH's products, may download and use any file.
Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
Please use this service at your own risk.
If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
Files are subject to deletion, or modification of the contents or specifications without notice.
Please confirm that the downloading file size completely accords
with the download file size shown.
If the file sizes do not match, delete the file without decompressing and then download the same file once again.
Download
Note:
This program should be run on a PC in which Pro-Server with Pro-Studio Ver. 4.12 has been installed. If your Pro-Server with Pro-Studio is earlier than Ver. 4.12, please update it with the following module.
When you install Pro-Server with Pro-Studio with the setup type "Custom", please be aware of the following.
-
If the action functions are added from the master CD after Pro-Server with Pro-Studio is updated to Ver. 4.13 with this module, the action functions are not updated to Ver. 4.13. In this case, please reinstall Pro-Server with Pro-Studio with your desired action functions.
Module for updating
Pro-Server with Pro-Studio to Ver.
4.13
Features
1.
The following function is improved.
-
Read/Write-cache
performance of PLC devices has
been improved.
2. The following issues were resolved.
-
In "Import
C-Package Symbol", when
a project in which many symbols
has been registered is specified,
it may be impossible Pro-Server
imports all the symbols.
-
In "Writes
Data to E-Mail" action,
text received by some cell phones
may transformed.
-
Access to a certain
address range of "Toshiba
PROSEC-T Series", "Toshiba
PROSEC-T(Ether)", and "KEYENCE
KZ-10_80RW/TW Series" causes
an error.
Protocol
Name
Device
Name
Address
Range
Toshiba
PROSEC-T Series
Toshiba PROSEC-T(Ether)
Z
02560-4095F
KEYENCE
KZ-10_80RW/TW Series
(Input-Output
Relay)
00500-00915
(Internal
Auxiliary Relay)
01000-01915
03000-06915
(Special
Auxiliary Relay)
02000-02915
-
In "Create
report using Excel" action,
when "Newest Data (CF Card
internal data)" is specified
as "File No" setting
in some Data ID, continuation
of executing the action may cause
an error of "Unable to create
or read temporary file".
-
When GP Time and
Device Value are executed at
the same time from multiple "Create
report using Excel" actions,
Pro-Server does not worked. * Be
sure to restart Pro-Server
when the above error occurs.
Apart from this matter, your
PC and any data on the hard
disk are not affected by the
above error.
Module Installation (This is a self-extracting file)
Confirm that Pro-Server with Pro-Studio Ver. 4.12 is installed in your PC.
Since this software update module only overwrites the modified sections of the program (a portion of the program), do not uninstall Pro-Server with Pro-Studio from your PC.
Be sure to quit Pro-Server with Pro-Studio before installing this module.
Installation Procedure
Click on the link "Pro-ServerV413.exe" in the box above to download the file to the desired folder.
After the download is completed, double-click on the "Pro-ServerV413.exe" file to start installation.
Follow the installer program's directions.
When installation is completed normally, " Setup completed." is displayed. If there are any problems and installation can not be completed, contact our company.
