|
Driver Download |
|
|
> PLCs > YASKAWA MP2000/MP900/CP9200SH Series Protocol |
|
Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.
Terms of Use
- Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
- Who, uses or plans to use SEJH's products, may download and use any file.
- Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
- This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
- Please use this service at your own risk.
- If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
- Files are subject to deletion, or modification of the contents or specifications without notice.
- Please confirm that the downloading file size completely accords
with the download file size shown.
- If the file sizes do not match, delete the file without decompressing and then download the same file once again.
|
Title |
YASKAWA MP2000/MP900/CP9200SH Series Protocol |
File Name |
CP9200SH.EXE |
File Size |
1,342KB |
Supported Software |
GP-PRO/PB III for Windows Ver.2.1 or later
Pro-Server with Pro-Studio Ver.3.0 or later |
Supported PLCs |
MP2300 Series, MP920 Series, CP9200SH Series |
Supported Units |
- ST Series
ST400, ST401
- GP Series
GP70, GP77R, GP377, GP2000 Series
- GLC Series
GLC2000 Series
- Factory Gateway Series |
Update Description |
Expand the device addresses of the MP2300. |
PLC Connection Manual |
For details, please read the following PDF:
Yaskawa Electric Corporation MP2000/MP900/CP9200SH Protocol (PDF:277KB) |
|
Installation (The downloaded file is self-extracting.) |
1. |
Prior to installing the driver, close all your personal computer applications, including any resident program such as virus detection program, etc. |
2. |
Click on the above file name to download the data to desired folder. |
3. |
After the download to your PC is finished, double-click on the file's icon to start the installer program. |
4. |
After the installer starts, follow the instructions given on each screen.
The installer’s default setup folder is for installing the driver to GP-PRO/PB III for Windows. |
5. |
After installation, when using GP-PRO/PB III for Windows Ver. 2.1 up to but not including Ver. 6.0, or Pro-Server with Pro-Studio, select
[YASKAWA MP2000/MP900/CP9200SH] for the "PLC Type".
When using GP-PRO/PB III for Windows Ver. 6.0 or later, click on the Device/PLC area's [Yaskawa Electric Corp.] selection and select
[YASKAWA MP2000/MP900/CP9200SH].
* When using the driver, be sure to refer to the PLC Connection Manual PDF (Shown above). Also, for general information regarding PLC connection and documentation conventions please refer to your own Device/PLC Connection Manual. |
|
Last Updated: October 1, 2004 |
|