Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.
Terms of Use
Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
Who, uses or plans to use SEJH's products, may download and use any file.
Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
Please use this service at your own risk.
If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
Files are subject to deletion, or modification of the contents or specifications without notice.
Please confirm that the downloading file size completely accords
with the download file size shown.
If the file sizes do not match, delete the file without decompressing and then download the same file once again.
Download
Note:
To use this update, the Enhanced Write Filter (hereafter described as "EWF") must be set to "EWF Disable" or "Protect OFF". After having set it to "EWF Disable" or "Protect OFF" using EWFSettingTool, please restart your system before installing.
* Depending on EWFSettingTool version, you can set it to "EWF Disable" or "Protect OFF".
When customers use the following product, update is required.
XP Embedded
Model
Software Revision
Volume Label
PS2000B-XPE1G-M1-BLD
[-] to [A]
2000BXPEM1 to 2000BXPEM2
PS3700A-XPE1G-E6-M1-BLD
[-]
3700E6XPEM1
PS3701A-XPE1G-E6-M1-BLD
[-]
3701E6XPEM1
PS3700A-XPE1G-P4-M1-BLD
[-]
3700P4XPEM1
PS365XA-XPE1G-M1-BLD
[-] to [A]
365XAXPEM1 to 365XAXPEM2
PLX930-XPE1G-M1-BLD
[-] to [B]
PLX930XPEM1 to PLX930XPEM3
Limitations
Before update, confirm that the Write Filter function is disabled. ("EWF Disable" or "Protect OFF" must be selected in "EWFSettingTool.exe".)
Once you install this update module, you cannot uninstall it.
To install this update to the products below, you must download it to a PC first. On the PC, follow the "Extracting (Opening) the file" steps 1-3, below. Then, copy the extracted "DeleteLanguage_300.exe" file to your panel computer using external media etc and install it by following the "Extracting (Opening) the file" steps 4 and 5.
Model
Software Revision
Volume Label
PS2000B-XPE1G-M1-BLD
[-] to [A]
2000BXPEM1 to 2000BXPEM2
PS3700A-XPE1G-E6-M1-BLD
[-]
3700E6XPEM1
PS3701A-XPE1G-E6-M1-BLD
[-]
3701E6XPEM1
PS3700A-XPE1G-P4-M1-BLD
[-]
3700P4XPEM1
Limitations
Refer to "3.1 Write Filter Settings Procedures" of the manual