Products
Download
Contact us
Back to Top

Driver Download

PLCs >Shibaura Machine CO., LTD TC Series (TCmini/TC200) Driver

Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.

Terms of Use
  1. Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
  2. Who, uses or plans to use SEJH's products, may download and use any file.
  3. Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
    However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
  4. This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
  5. Please use this service at your own risk.
  6. If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
  1. Files are subject to deletion, or modification of the contents or specifications without notice.
  2. Please confirm that the downloading file size completely accords with the download file size shown.
  3. If the file sizes do not match, delete the file without decompressing and then download the same file once again.
 Download
Title Shibaura Machine CO., LTD TC Series (TCmini/TC200) Driver
Version Ver. 1.13.03
File Name TSMTC200.exe
File Size 852KB
Applicable Software GP-Pro EX Ver. 1.10.000 or later
Pro-Server EX Ver. 1.10.000 or later
To check your version, go to the ” Help ” menu → ” Version Info ”.
Related Devices
  • TC200 Series
  • TC200S Series
  • TCmini Series
Related Units
  • GP3000 Series
  • GP4100 Series (GP4105, GP4016, GP4107: GP-Pro EX Ver. 2.60.000 or later, GP4104: GP-Pro EX Ver. 2.70.000 or later.)
  • GP4000M Series (GP-Pro EX Ver. 2.71.000 or later)
  • IPC Series for WinGP (GP-Pro EX Ver. 2.00.000 or later)
  • General PCs for WinGP (GP-Pro EX Ver. 2.10.000 or later)
Manual For details, please read the following
PDF: tsmtc200.pdf ( 2,488KB )

For general information regarding Device connection and documentation conventions, please refer to "Device/PLC Connection Manual".
Updated Contents Ver. 1.13.03 (Oct. 04, 2011)
The following settings were added:
  • Pass-through is supported. * Click here for more information.

Installation (This file is self-extracting.)

  1. Please confirm that the supported software is installed in your computer. Prior to installing the driver, close all your personal computer applications, including any resident programs such as virus detection program, etc.
  2. Click on the above file name to download the data to desired folder.
  3. After the download to your PC is finished, double-click on the file's icon to start the installer program.
  4. After the installer starts, follow the instructions given on each screen.
  5. After installation, execute GP-Pro EX.
  6. After installation, click on the Device/PLC area's [Shibaura Machine CO., LTD selection and select [TC Series(TCmini/TC200)]
  7. *When using the driver, be sure to refer to the Device Connection Manual PDF (Shown above). Also, for general information regarding device connection and documentation conventions, please refer to "Device/PLC Connection Manual".


Update History:

[Ver. 1.13.03] (Oct. 4, 2011)

The following settings were added:
  • Pass-through is supported.

[Ver. 1.12.03]

  • The maker name was changed from “Shibaura Machine CO., LTD” to “Shibaura Machine CO., LTD”.

[Ver. 1.12.02]

The following settings were added:
  • GP4000M Series was supported.
    * To use a GP4000M Series Ver. 2.71.000 or later of GP-Pro EX are necessary.
  • GP4104 was supported.
    * To use a GP4104 (Ethernet Multilink) Ver. 2.70.000 or later of GP-Pro EX are necessary.
The following issue was corrected:
  • A problem has been corrected that the communication error occurs approximately every 49.71 days during communication with PLC in the case of continuous operation.

[Ver. 1.12.01]

The following settings were added:
  • GP4105, GP4106, GP4107 was supported.
    * To use a GP4105, GP4106, GP4107 Ver. 2.60.000 or later of GP-Pro EX are necessary.

[Ver. 1.11.01]

  • The driver name was changed from “PROVISOR TC200” to “TC Series (TCmini/TC200)”.

The following settings were added:
  • "Device Data Copy Tool" was supported.

[Ver. 1.10.00] (Jun. 14, 2007)

New

Last Updated : Oct. 4, 2011
Posted : Jun. 14, 2007

| Return to Top | | Back | HOME |
FAQ for use | Protection of Personal Information | Trademark Acknowledgments | About Intellectual Property Rights | Terms of Use
Copyright (C) 2005- Schneider Electric Japan Holdings Ltd. All Rights Reserved.