Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.
Terms of Use
Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
Who, uses or plans to use SEJH's products, may download and use any file.
Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
Please use this service at your own risk.
If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
Files are subject to deletion, or modification of the contents or specifications without notice.
Please confirm that the downloading file size completely accords
with the download file size shown.
If the file sizes do not match, delete the file without decompressing and then download the same file once again.
GP-Pro EX Ver. 2.10.000 or later
Pro-Server EX Ver. 1.30.000 or later
(TAG data functionality support requires GP-Pro EX Ver. 3.01.000 or later and Pro-Server EX Ver. 1.31.000 or later.) * To check your version, go to the ” Help ” menu → ” Version Info ”.
Required versions depend on models.
Please check "Supported Models / Version" for the required versions of GP-Pro EX.
Required driver versions for different models are listed below.
For details, please read the following
PDF: sies7tcp.pdf ( 427KB )
For general information regarding Device connection and documentation conventions, please refer to "Device/PLC Connection Manual".
Updated Content
Ver. 1.19.11 (Mar. 23, 2017)
The following functionalities have been added:
Support LOGO8 new version (FS04) * Please check FS04 version by PLC side version description or online connection TIA Portal tool. You can check FS04 version by packing box label.
How to install (This is a self-extracting file.)
Please make sure that the supported software is installed. Prior to installion, close all applications running on a PC including any resident programs such as a virus detection program, etc.
Click on the file name above to start downloading the file.
After download is complete, double-click on the downloaded file to start installation.
Follow the instructions on the screen.
After installation, start GP-Pro EX/Pro-Server EX.
Select [Siemens AG] for "Manufacturer" and [SIMATIC S7 Ethernet] for "Series" in [Device/PLC] settings of [System Settings] on the [Project] menu.
*
When using the driver, be sure to refer to the Device Connection Manual above (PDF file).
Also, please refer to "Device/PLC Connection Manual" for general information regarding device connection and documentation conventions.
Update History:
[Ver. 1.19.11] (Mar. 23, 2017)
The following functionality has been added:
Support LOGO8 new version (FS04) * Please check FS04 version by PLC side version description or online connection TIA Portal tool. You can check FS04 version by packing box label.
[Ver. 1.18.10]
The following setting was added:
Tag import dialog box now improved.
[Ver. 1.17.09] (Nov. 16, 2012)
The following functionality has been added:
TAG data In the case of S7-300/400 series: It can import TAG data from Siemens AG STEP7 v5 project files. * To use TAG import functionality, if GP-Pro EX is used, Ver. 3.01.000 or later is required [If GP4000M Series used, GP-Pro EX Ver. 3.10.000 or later is required.], and if Pro-Server EX is used, Ver.1.31.000 or later is required.
[Ver. 1.16.08] (Jul. 27, 2012)
The following setting was added:
LT3000 Series is supported.
[Ver. 1.15.08] (Mar. 16, 2012)
The following setting was added:
LOGO! Series is supported.
[Ver. 1.14.08] (Jun. 22, 2011)
The following setting was added:
S7-1200 Series is supported.
The following issue was corrected:
When a wrong device code is specified in Indirect Designation, access be made to an inappropriate device.
[Ver. 1.13.07] (Apr. 25, 2011)
The following setting was added:
Support GP4100 Series *To use a GP4100 Series, Ver. 2.70.000 or later versions of GP-Pro EX are necessary.
[Ver. 1.12.07] (Dec. 8, 2009)
The following issue was corrected:
Inputting 32 or more characters in the device address field in the address input screen in the Device Monitor may cause the Display freeze.
[Ver. 1.12.06] (Jan 22, 2009)
The following issue was corrected:
When GP-Pro/PB III project is converted.
The device address is converted to "-Undefined-".
[Ver. 1.12.05] (Jun 18, 2008)
The following content has been improved:
Processing of divided packet.
[Ver. 1.12.04] (Aug 31, 2007)
The following setting was added:
S7-200 Series is supported.
[Ver. 1.11.04] (Jun. 14, 2007)
The following setting was added:
OP Communication is supported.
[Ver. 1.11.03] (Jan. 9, 2007)
The following setting was added:
Support for DeviceMonitor. *Ver. 2.00.000 or later version of GP-Pro EX are necessary to use a DeviceMonitor.
[Ver. 1.10.03] (Nov. 28, 2006)
The following issue was corrected:
Monitoring a bit address from Pro-Server EX causes the ON/OFF status to be indicated incorrectly in each bit of the monitored value.
[Ver. 1.10.02] (Jul. 3, 2006)
The following issue was corrected:
The improper address is displayed when sampling is specified
Last Updated : Mar. 23, 2017
Posted : Jun. 14, 2007
