> PLCs >Schneider Electric Industries MODBUS SLAVE Driver
Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.
Terms of Use
Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
Who, uses or plans to use SEJH's products, may download and use any file.
Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
Please use this service at your own risk.
If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
Files are subject to deletion, or modification of the contents or specifications without notice.
Please confirm that the downloading file size completely accords
with the download file size shown.
If the file sizes do not match, delete the file without decompressing and then download the same file once again.
For details, please read the following PDF:mod_slav.pdf ( 879KB )
For general information regarding Device connection and documentation conventions, please refer to "Device/PLC Connection Manual".
Updated Contents
Ver. 1.13.05 (Jul. 27, 2010)
The following issues were corrected:
When using GP4107, occasionally no response will be returned.
When using n:1 connection of the ST3000 series, occasionally no response will be returned.
When there is communication IDLE in the communication packets, occasionally no response will be returned.
Installation (This file is self-extracting.)
Please confirm that the supported software is installed in your computer. Prior to installing the driver, close all your personal computer applications, including any resident programs such as virus detection program, etc.
Click on the above file name to download the data to desired folder.
After the download to your PC is finished, double-click on the file's icon to start the installer program.
After the installer starts, follow the instructions given on each screen.
After installation, execute GP-Pro EX.
After installation, click on the Device/PLC area's [Schneider Electric Industries] selection and select [MODBUS SLAVE].
*
When using the driver, be sure to refer to the Device Connection Manual PDF (Shown above). Also, for general information regarding Device connection and documentation conventions please refer to "Device/PLC Connection Manual".
Update History:
[Ver. 1.13.05] (Jul. 27, 2010)
The following issues were corrected:
When using GP4107, occasionally no response will be returned.
When using n:1 connection of the ST3000 series, occasionally no response will be returned.
When there is communication IDLE in the communication packets, occasionally no response will be returned.
[Ver. 1.13.04] (Feb. 18, 2010)
The following issue was corrected:
Occasionally, GP4100 is not responded.
[Ver. 1.13.03]
The following setting was added:
Support GP4100 Series. * To use a GP4100 Series, Ver. 2.60.000 or later versions of GP-Pro EX are necessary
[Ver. 1.12.02] (Feb. 12, 2008)
The following settings were added:
WinGP is supported.
Diagnostics command[08(0x08)] is supported( Serial Line only)
[Ver. 1.11.02] (Oct. 1, 2007)
The following setting was added:
Support for Device Monitor *Ver. 2.00.000 or later version of GP-Pro EX are necessary to use a Device Monitor.
[Ver. 1.10.02] (Feb. 5, 2007)
The following issues were corrected:
When n: 1 connection in RS422/485(2wire). Occasionally, GP3000 is not responded.
Necessary "Character timeout value" for normal operation is larger than the specification value.