>PLCs >Modbus-IDA General MODBUS SIO Master Driver
Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.
Terms of Use
Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
Who, uses or plans to use SEJH's products, may download and use any file.
Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
Please use this service at your own risk.
If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
Files are subject to deletion, or modification of the contents or specifications without notice.
Please confirm that the downloading file size completely accords
with the download file size shown.
If the file sizes do not match, delete the file without decompressing and then download the same file once again.
For details, please read the following
PDF:mod_grs.pdf ( 1,704KB )
For general information regarding Device connection and documentation conventions, please refer to "Device/PLC Connection Manual".
Updated Contents
Ver. 1.13.03 (Jul. 27, 2012)
The following functions were added:
ASCII mode is supported.
The Driver’s Series name was changed.
Installation (This file is self-extracting.)
Please make sure that the supported software is installed. Prior to installion, close all applications running on a PC including any resident programs such as a virus detection program, etc.
Click on the file name above to start downloading the file.
After download is complete, double-click on the downloaded file to start installation.
Follow the instructions on the screen.
After installation, start GP-Pro EX/Pro-Server EX.
Select [Modbus-IDA] for "Manufacturer" and [General MODBUS SIO Master] for "Series" in [Device/PLC] settings of [System Settings] on the [Project] menu.
*
When using the driver, be sure to refer to the Device Connection Manual PDF (Shown above). Also, for general information regarding Device connection and documentation conventions please refer to "Device/PLC Connection Manual".
Update History:
[Ver. 1.13.03] (Jul. 27, 2012)
The following functions were added:
ASCII mode is supported.
The Driver’s Series name was changed.
[Ver. 1.12.03]
The following functions were added:
GP4000 Series is supported. * To use GP4000 Series, GP-Pro EX Ver. 3.00.000 or later is required.
USB/RS-422/485 Conversion Adapter is supported. * To use USB/RS-422/485 Conversion Adapter, GP-Pro EX Ver. 3.00.000 or later is required.
The manufacturer name was changed.
[Ver. 1.11.02]
The following functions were added:
GP4105, GP4106, GP4107 are supported. * To use GP4105/GP4106/GP4107, GP-Pro EX Ver. 2.60.000 or later is required.
GP4104 (Ethernet Multilink) is supported. * To use USB/RS-422/485 Conversion Adapter, GP-Pro EX Ver. 3.00.000 or later is required.
GP4000M Series is supported. * To use GP4000M Series, GP-Pro EX Ver. 2.71.000 or later is required.
[Ver. 1.10.02] (Oct. 14, 2008)
The following issues were corrected:
There was the case that communication became slow, because the packet division wasn't correct.
There was the case Display is frozen, when write to the address that out of range of Custom Setting.
