Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.
Terms of Use
Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
Who, uses or plans to use SEJH's products, may download and use any file.
Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
Please use this service at your own risk.
If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
Files are subject to deletion, or modification of the contents or specifications without notice.
Please confirm that the downloading file size completely accords
with the download file size shown.
If the file sizes do not match, delete the file without decompressing and then download the same file once again.
GP-Pro EX Ver. 2.10.000 or later
Pro-Server EX Ver. 1.30.000 or later
To check your version, go to the ” Help ” menu → ” Version Info ”.
Supported Devices
Millenium 3 Smart Series
Millenium 3 Essential Series
Supported Models
GP3000 Series(Except GP3000H)
LT3000 Series
GP4100 Serie
GP-4105 (GP-Pro EX Ver. 2.60.000 or later)
GP-4104 (Ethernet Multilink only)(GP-Pro EX Ver. 2.70.000 or later)
GP4000M Series (GP-Pro EX Ver. 2.71.000 or later)
GP4000 Series (GP-Pro EX Ver. 3.00.000 or later)
Device/PLC Connection Manual
For details, please read the following
PDF:cstcrzm3.pdf ( 534KB )
For general information regarding Device connection and documentation conventions, please refer to "Device/PLC Connection Manual".
Updated Content
Ver. 1.10.01 (Jul. 4, 2013)
New
How to Install (This is a self-extracting file.)
Please make sure that the supported software is installed. Prior to installion, close all applications running on a PC including any resident programs such as a virus detection program, etc.
Click on the file name above to start downloading the file.
After download is complete, double-click on the downloaded file to start installation.
Follow the instructions on the screen.
After installation, start GP-Pro EX/Pro-Server EX.
Select [Crouzet] for "Manufacturer" and [Millenium 3 FBD] for "Series" in [Device/PLC] settings of [System Settings] on the [Project] menu.
*
When using the driver, be sure to refer to the Device Connection Manual PDF (Shown above). Also, please refer to "Device/PLC Connection Manual" for general information regarding device connection and documentation conventions.