>PLCs >Cognex Corporation In-Sight Vision Systems Driver
Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.
Terms of Use
Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
Who, uses or plans to use SEJH's products, may download and use any file.
Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
Please use this service at your own risk.
If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
Files are subject to deletion, or modification of the contents or specifications without notice.
Please confirm that the downloading file size completely accords
with the download file size shown.
If the file sizes do not match, delete the file without decompressing and then download the same file once again.
The required versions of software for this driver installer are as follows.
GP-Pro EX Ver. 2.70.000 or later
Pro-Server EX Ver. 1.30.000 or later You can check your version by ”Help” function -> ”Version Info”.
Supported Devices
In-Sight 7000 Series Vision Systems
In-Sight 5000 Series Vision Systems
In-Sight Micro Vision Systems
Related Units
Required versions depend on models.
Please check "Supported Models / Version" for the required versions of GP-Pro EX.
Required driver versions for different models are listed below.
For details, please read the PDF file: cgx_sys.pdf ( 433KB )
For general information regarding Device connection and documentation conventions, please refer to "Device/PLC Connection Manual".
Update Content
Ver. 1.12.04 (Nov. 27, 2015)
The following functionalities have been added.
Support of In-Sight 7000 Series Vision Systems
Support of 24-bit color image
How to install (This is a self-extracting file.)
Please confirm that the supported software is installed in your computer. Prior to installing the driver, close all your personal computer applications, including any resident programs such as virus detection program, etc.
Click on the above file name to download the data to desired folder.
After the download to your PC is finished, double-click on the file's icon to start the installer program.
After the installer starts, follow the instructions given on each screen.
After installation, execute GP-Pro EX.
Click on the Device / PLC area's [Cognex Corporation] selection and select [In-Sight Vision Systems].
*
When using the driver, be sure to refer to the Device Connection Manual PDF (Shown above). Also, for general information regarding device connection and documentation conventions, please refer to "Device/PLC Connection Manual".
Update History:
[Ver. 1.12.04] (Nov. 27, 2015) NEW
The following functionalities were added.
Support of In-Sight 7000 Series Vision Systems
Support of 24-bit color image
[Ver. 1.11.03]
The following issue was fixed.
Low performance with displaying image under Windows Vista or later.
[Ver. 1.11.02]
The following functionalities were added.
Device Monitor
SYSTEM/StoreFile device
SYSTEM/StartupJobFile device
Calculation on IMAGE device
The following issue was fixed.
When connected to "In-Sight 5400C" (color model), communication is enabled. When a Live image is displayed, however, only one gray color screen is displayed.
[Ver. 1.10.01]
The following issue was fixed.
When "IMAGE/Cell" and "SYSTEM/JobFileName" are used for Text Display and 3 or more characters were specified for Number of Characters, Simulation does not work.