>PLC Ladder Monitor >Mitsubishi Electric Corporation's PLC Q Series PLC Ladder Monitor
Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.
Terms of Use
Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
Who, uses or plans to use SEJH's products, may download and use any file.
Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
Please use this service at your own risk.
If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
Files are subject to deletion, or modification of the contents or specifications without notice.
Please confirm that the downloading file size completely accords
with the download file size shown.
If the file sizes do not match, delete the file without decompressing and then download the same file once again.
For general information regarding Device connection and documentation conventions, please refer to "Device/PLC Connection Manual".
Updated Contents
Ver. 1.02.01 (Aug. 26, 2009)
The following issue was corrected:
When read a comment data of Intelligent function module device of Module access device “Un\G0 to 65535” device, reading process stops on the way. * With the specifications of Ladder Monitor. The comment of the “Intelligent function module device” is not displayed. The problem to stop was corrected.
Installation (This file is self-extracting.)
Please confirm that the supported software is installed in your computer. Prior to installing the driver, close all your personal computer applications, including any resident programs such as virus detection program, etc.
Click on the above file name to download the data to desired folder.
After the download to your PC is finished, double-click on the file's icon to start the installer program.
After the installer starts, follow the instructions given on each screen.
*
When installing, it is required to enter the serial numbers and keycodes on the license you purchased.
*
When using the driver, be sure to refer to the Device Connection Manual PDF (Shown above). Also, for general information regarding Device connection and documentation conventions please refer to "Device/PLC Connection Manual".
Update History:
[Ver. 1.02.01] (Aug. 26, 2009)
The following issue was corrected:
When read a comment data of Intelligent function module device of Module access device “Un\G0 to 65535” device, reading process stops on the way. * With the specifications of Ladder Monitor. The comment of the “Intelligent function module device” is not displayed. The problem to stop was corrected.
[Ver. 1.02.00] (Feb. 5, 2009)
The following settings were added:
Added Universal model QCPU (Q00UJCPU, Q00UCPU, Q01UCPU, Q02UCPU, Q03UDCPU, Q04UDHCPU, Q06UDHCPU, Q10UDHCPU, Q13UDHCPU, Q20UDHCPU, Q26UDHCPU) to related device on Q Series CPU Direct.
Added Universal model Built-in Ethernet port QCPU (Q03UDECPU, Q04UDEHCPU, Q06UDEHCPU, Q10UDEHCPU, Q13UDEHCPU, Q20UDEHCPU, Q26UDEHCPU) to related device via other CPU on Multiple CPU system on Q Series CPU Direct. * Q/QnA Series Ethernet doesn't support to the above-mentioned CPUs.
Last Updated : Aug. 26, 2009
Posted : Feb. 5, 2009
