 |
| Driver Download |
|
Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.
Terms of Use
- Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
- Who, uses or plans to use SEJH's products, may download and use any file.
- Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
- This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
- Please use this service at your own risk.
- If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
- Files are subject to deletion, or modification of the contents or specifications without notice.
- Please confirm that the downloading file size completely accords
with the download file size shown.
- If the file sizes do not match, delete the file without decompressing and then download the same file once again.
|
Note:
→ Precautions for adding a new driver onto Windows Vista/7
→ Precautions for adding a new driver at Daylight Saving Time
| Title |
RKC INSTRUMENT INC. Temperature Controller driver |
| Version |
Ver. 1.12.02 |
| File Name |
RKC_RKCS.exe |
| File Size |
968KB |
| Applicable
Software |
GP-Pro EX from Ver. 1.10.000 or later
Pro-Server EX Ver. 1.10.000 or later
You can check your version by "Help" function -> "Version Info". |
| Related
Inverter |
- CB Series
- FB400 Series
- FB900 Series
- HA400 Series
- HA900 Series
- MA900 Series
- MA901 Series
- SRV Series
- SRX Series
- SA100 Series
- SA200 Series
- SR Mini HG Series(H-PCP-A/H-PCP-J)
- SRZ Series
|
| Related
Units |
|
| Device/PLC Connection Manual |
For details, please
read the following
rkc_rkcs.pdf ( 6,974KB )
For general information regarding Device connection and documentation conventions, please refer to "Device/PLC Connection Manual".
|
| Updated Contents |
Ver. 1.12.02 (May. 21, 2010)
The following settings were added:
- Support SRZ Series.
- Support GP4100 Series.
* To use a GP4100 Series, Ver. 2.60.000 or later versions of GP-Pro EX are necessary.
The following issues were corrected:
- When the following addresses were accessed, the communication error will be displayed.
For FB400, FB900 Series: Address 0018
For HA400, HA900 Series: Address 0017, 0035, 00AB, 00C5
For REX-P250 Series: Address 0003
For SR Mini (H-PCP-J) Series: Address 0041.
- In “Reference To Parameter” dialog of REX-P300 Series, unusable identifiers (Address: 0020 to 002C) will be displayed.
|
Installation ( The downloaded file is self-extracting. )
| 1. |
Please confirm that the supported software is installed in your computer. Prior to installing the driver, close all your personal computer applications, including any resident programs such as virus detection program, etc. |
| 2. |
Click on the above file "RKC_RKCS.exe" to
download the data to the desired
folder. |
| 3. |
After the download to your PC is finished, double-click
on the file’s
icon to start the installer program. |
| 4. |
After the installer starts, follow the instructions
given. |
| 5. |
After installation, execute GP-Pro EX.
|
| 6. |
Click on the Device/PLC area’s [RKC INSTRUMENT INC.] selection and select [Temperature Controller]. |
- *
- When using the driver, be sure to refer to the Device Connection Manual PDF (Shown above). Also, for general information regarding Device connection and documentation conventions please refer to "Device/PLC Connection Manual".
Update History:
[Ver. 1.12.02] (May. 21, 2010)
The following settings were added:
- Support SRZ Series.
- Support GP4100 Series.
* To use a GP4100 Series, Ver. 2.60.000 or later versions of GP-Pro EX are necessary.
The following issues were corrected:
- When the following addresses were accessed, the communication error will be displayed.
For FB400, FB900 Series: Address 0018
For HA400, HA900 Series: Address 0017, 0035, 00AB, 00C5
For REX-P250 Series: Address 0003
For SR Mini (H-PCP-J) Series: Address 0041.
- In “Reference To Parameter” dialog of REX-P300 Series, unusable identifiers (Address: 0020 to 002C) will be displayed.
[Ver. 1.11.01]
The following settings were added:
- Support for Device Monitor.
* To use a Device Monitor, Ver. 2.00.000 or later versions of GP-Pro EX are necessary.
Last Updated: May
21, 2010
Posted: Jul
19, 2006 |
|
