Products
Download
Contact us
Back to Top

Driver Download

>CANopen Connection >Set as the slave for GP3000 Series >CAN in Automation CANopen Slave EDS file

Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.

Terms of Use
  1. Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
  2. Who, uses or plans to use SEJH's products, may download and use any file.
  3. Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
    However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
  4. This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
  5. Please use this service at your own risk.
  6. If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
  1. Files are subject to deletion, or modification of the contents or specifications without notice.
  2. Please confirm that the downloading file size completely accords with the download file size shown.
  3. If the file sizes do not match, delete the file without decompressing and then download the same file once again.
 Download

Note:

→ Precautions for adding a new driver onto Windows Vista/7
→ Precautions for adding a new driver at Daylight Saving Time

Title CAN in Automation CANopen Slave EDS file
Version File version. 1, File revision. 2
File Name CANOPENS_EDS.exe
File Size 1,206KB
Object driver CAN in Automation CANopen Slave
Related Device
  • GP3000 Series(CANopen Master)
  • LT3000 Series(CANopen Master)
  • Schneider Premium Series
  • Schneider Twido Series
Related Units
  • GP3000 Series * + CANopen Slave Unit (CA9-CANALL/EX-01)
    (Be sure to read GP3000 Series Hardware Manual for the restrictions.)

    * except GP3000 series(CANopen master type),GP3200 and GP3000H

→ CAN in Automation CANopen Slave Driver are here.

Installation (This file is self-extracting.)

  1. Click on the above file name to download the data to desired folder.
  2. After the download to your PC is finished, double-click on the file's icon to start the installer program.
  3. After the installer starts, follow the instructions given on each screen.
    This installer's default setup folder is C:\Fieldbus

File name Notes
PFCA9-CANAL_0100E.eds This is an EDS file for CANopen Slave unit(CA9-CANALL/EX-01) for GP3000 Series.
*
When using the driver, be sure to refer to the Device Connection Manual PDF (Shown above). Also, for general information regarding Device connection and documentation conventions please refer to "Device/PLC Connection Manual".

Update History:

[File version. 1, File revision. 2] (Jun. 12, 2009) New

Last Updated : Jun. 12, 2009
Posted :Jun. 12, 2009

| Return to Top | | Back | HOME |
FAQ for use | Protection of Personal Information | Trademark Acknowledgments | About Intellectual Property Rights | Terms of Use
Copyright (C) 2005- Schneider Electric Japan Holdings Ltd. All Rights Reserved.