T.3 Problems with Display operation

T.3.1 The touch panel (switch) does not respond

T.3.2 Different part of the display responds when touched (switch), or responds by itself - When Using the Display Unit

T.3.3 Different part of the display responds when touched (switch), or responds by itself - When Using WinGP

T.3.4 The Display does not turn ON (The initial screen is not displayed. The screen remains black.)

T.3.5 An alarm sounds continuously

T.3.6 Lines (streaks) on the screen, Screen turns white

T.3.7 The status LED is flashing in green

T.3.8 The screen flickers

T.3.9 Display response is slow

T.3.10 A screen prompting you to re-transfer appears after you have transferred the file