T.3.3 Different part of the display responds when touched (switch), or responds by itself - When Using WinGP

To determine if the WinGP unit is faulty, run the self-diagnosis function of the PS series, PL series, and PC/AT unit. Perform the analog touch panel correction (calibration).

For the setting procedure, see the following.

  1. Install Mouse Emulation Software.

    • If Mouse Emulation Software is not readily available, you can download it from our website. For information about how to install Mouse Emulation Software, refer to the following website.
      http://www.pro-face.com/otasuke/

  2. From the start menu, select [All Programs], [UPDD], and then [Calibrate].

  3. When the Calibrate screen appears, touch, in turn, the arrow marks displayed on the screen.

  4. When the [Check calibration] dialog box appears, click [OK]. This will complete the correction.