| Category |
Applications |
Availability |
Confirmed operation |
| Support WES7? |
Version with availability confirmed |
Time required for installation
(Approx.)
|
Run correctly? *1 |
Note |
| PLC |
Siemens
STEP7 |
Δ |
- |
Ver. 5.5 |
60 min. |
Δ |
Some functions like Logic's Status Monitor, Edit do not run. |
Rockwell
RSLogix 5000 |
Ver. Limited |
- |
Ver. 20 |
120 min. |
|
Ver. 17 could not be installed. |
Omron
CXOne, CX-Programer |
|
- |
Ver. 9.51 |
30 min. |
|
|
Mitsubishi
GX-Developer, GX-Works2 |
|
- |
Ver. 1.501x |
30 min. |
|
|
Yokogawa
WideField3 |
|
- |
Ver. R2.04 |
about 3 min. |
|
In case of direct connection to CPU CPU, RS-232C comunicaiton speed needs to be changed to 19200bps by Device Manager. |
Fuji Electric
SX-Programmer Expert(D300win) |
|
- |
Ver. 3.3.2.0 |
4 min. |
|
|
Fuji Electric
SX-Programmer Standard |
|
- |
Ver. 3.0.9.10 |
4 min. |
|
|
Schneider Electric
Unity Pro XL |
Δ |
- |
Ver. 8.0 |
39 min. |
|
Error messge are displayed during installation, but you can continue and finish installing by clicking "OK". |
Shibaura Machine CO., LTD
TCPRGOS-W |
|
- |
Ver. 2.30 |
about 1 min 20 sec |
|
|
KEYENCE
KV Studio V8 |
|
- |
Ver. 8.01 |
about 10 min |
|
|
Integrated platform
(PLC + HMI + IO) |
Schneider
SoMachine Basic |
|
- |
Ver 1.1 |
5 to 10 min. |
|
|
| Database |
Pro-face
Pro-Server EX |
|
- |
Ver. 1.33 |
5 min. |
|
|
Motion/
Inverter/
Driver |
Yaskawa
MPE720 |
|
- |
Ver. 7.0 |
10 min. |
|
|
Yaskawa
MA100 |
|
- |
Ver. 0.03 |
5 min. |
Not connected to a real unit |
When operation was confirmed, a real unit was not connected.
(Only Simulation done) |
Yaskawa
Sigma Win+ |
|
- |
Ver. 5.62 |
3 min. |
|
|
IAI
RCM-101-MW/USB
(Robo Cylinder) |
|
unsupported |
Ver. 6.00.02.00-E [2006.09.27] |
about 20 sec. |
|
In case of direct connection to CPU CPU, RS-232C comunicaiton speed needs to be changed to 38400bps by Device Manager. |
IAI
IA-101-MW/USB
(ASEL/PSEL/SSEL/XSEL/MSEL/TT) |
|
unsupported |
Ver. 7.2.2.0E
[2007.09.28] |
about 30 sec. |
|
|
Sanmei
CutyWave 3 |
|
- |
Ver. 1.03 |
about 30 sec. |
|
|
| Robot |
Yaskawa
Robot Controller
Software Pendant
Sentinel Driver |
Δ |
- |
Software Pendant Ver. 1.03, Sentinel Driver Ver. 7.5.8 |
About 1 min. |
|
>>When Start up, it shows error, "it can't recognize the USB license key".
1. Go to the following site
http://www.safenet-inc.jp/support-downloads/sentinel-drivers/?LangType=1041#
2. Download the USB driver from "new sentinel driver is here"
3. Install the driver you downloaded
4. Then the error will be solved.
>>When the software start communicating with the controller via Ethernet, it shows error.
In order to connect to controller, please do followings.
1. Go to [Start] - [Control Panel]
2. Select [System and Security]
3. Select [Windows Firewall] - [Advanced settings]
4. Select [Inbound Rules] on the left side list
5. Double click "Ypp SWP" on [Inbound Rules] list
6. Check "Enabled" on [General] item of [General] tab
7. Check all of "Domain", "Private", "Public" on [Profiles] item of [Advanced] tab
8. Set against other Ypp SWP, 2 x YppMain Application Settings of 5 to 7.
9. Then the error will be solved. |
EPSON
EPSON RC+7.0 |
Δ |
× |
Ver. 7.0.5 |
1 min |
|
Before installing RC+7.0, please execute "vcredisk_x86.exe" under "Microsoft .NET Framework 3.5" folder in EPSON RC70 install-media, otherwise, RC+7.0 would not be installed properly. |
| Vision Sensor |
Omron
TouchFinder for PC |
|
- |
Ver. 1.91 |
- |
|
|
Cognex
In-Sight Explorer |
- |
- |
Ver. 4.8.4 |
5 min. |
- |
Due to slower performance |
Cognex
VisionView |
|
- |
Ver. 1.6.3 |
3 min. |
|
|
| HMI software |
Pro-face
GP-Pro EX |
|
- |
Ver. 4.00 |
15 min. |
|
|
| VNC |
UltraVNC
Ultr@VNC Viewer (Client) |
|
N/A |
Ver 1.0.8.2 |
20 sec. |
|
|
| Microsoft Office |
Microsoft
Office 2007（Standard） |
|
- |
(Office 2007) |
30 min. |
|
|
Microsoft
Office 2010 |
|
- |
(Office 2010) |
30 min. |
|
|
Microsoft
Office 2013 |
|
- |
(Office 2013) |
30 min. |
|
Office 2013 required more than 5.12GB enpty space, when you install all applications. Enpty space on Open Box is about 5.7GB, so please consider to install selected appliations and so on. It does not allow you to specify installation driver, like D drive. |
| Browser |
Google
Chrome |
|
- |
Ver. 39.0.2171.95m |
2 min. 30 sec. |
|
|
| |
Mozilla
Firefox |
|
- |
Ver. 38.0.1 |
about 10 min. |
|
Firefox cannot connect to the internet with its default proxy settings. To connect to the internet, change the Firefox proxy setting by clicking Open menu icon in the upper right corner of the screen then selecting [Options] -> [Advanced] -> [Network] -> [Connection Settings] -> [Auto-detect proxy settings for this network]. |
| Security Software |
McAfee
McAfee Embedded Control |
|
|
Ver. 6.1.3.357 |
1 min. 30 sec. |
|
|
| Remote Control |
Itbrain
TeamViewer |
|
- |
Ver. 10.0.39052 |
about 1 min. |
|
Remote connection by SP5000 and a PC has been successfully operating. |
| Others |
JT Engineering
JoyWatcher Suite |
Δ |
- |
Ver. 8.2.1 (Development Version) |
about 4 min. |
|
JWDesign: When Start up, it shows error.
1. If you install the MSJTER35.DLL module from Microsoft Visual Basic .net 6.0 Alpha Platform or Visual Basic Runtime 6 Service Pack 5, the error will be solved.
2. EMSServer: When Start up, it shows error. You can't starts it.
3. ServerControl: When Start up, it shows error. But you can start it, please check if it is work well or not. |
National Instruments
LabView |
Δ |
- |
Version 14.0 (32-bit) (English) |
about 1 hour. |
|
- When it is installed, it needs about 4GB unzip free space, .
It specifies "C:\National Instruments Downloads" by default. We recommend that you delete these files after complete installation.
- This software might be down, when you place Active X components.
- When this software starts, it displays the warning message "out of memory". |
