| |
When setting [GP type] as GLC2400 or GLC2600 at GP-PRO/PB3 C-Package03, [Rev.*-None or 1] or [Rev.-2 or above] pulldown menu is shown. This means the revision of the GLC hardware. The supported features of each revision differs.
|
|
|
| |
| How to Read the Code |
| |
|
-
|
The revision code can be easily found using the GLCunit’s rear face identification
label or revision sticker. In the area titled “REV”, the code is indicated by asterisks
(*) or marked with a marker pen.
In the example below, asterisks (*) are placed at positions “D”, “1”, and “2”,
which indicates the revision version as “D-2”. |
| |
|
|
|
- |
Revision Categories |
| |
[Rev.*-None or 1] |
The revision code is not used, or is “1”. |
[Rev.-2 or above] |
The revision code is "2" or higher. |
|
| |
|
| The difference between [Rev.*-None or 1] and [Rev.-2 or above] |
| |
| |
Instruction |
[Rev.-2 or above] supports a SCL instruction （scaling feature） or function control instructions. >>Refer |
Variable |
The variable storage memory in GLC of [Rev.-2 or above] is 64K byte.You can set more variables than [Rev.*-None or 1].([Rev.*-None or 1] is 32K byte.) |
GLC ladder monitor |
[Rev.-2 or above] supports [Setup Value Edit Feature]. >> Refer |
|
| |
|
| |
|
Return to Top
Close