Error Code* |
Error Message |
Cause and Troubleshooting |
0xC0B00298
SAAF152
-1062206824
3232760472 |
File access went wrong with the destination main unit. |
Please forcibly transfer the project file to the GP3000 Series Node using 'GP-Pro EX', and then transfer the network project file using 'Pro-Studio EX'. |
0xC0B00299
SAAF153
-1062206823
3232760473 |
CF-Card is not inserted or not supported. |
Please check whether the CF-card is properly inserted. |
0xC0B0029B
SAAF155
-1062206821
3232760475 |
System Error |
Please install 'Pro-Studio EX' again. |
0xC0B0029C
SAAF156
-1062206820
3232760476 |
Transfer stopped. |
If operation is continued without any interruption by the user, this message is not displayed. |
0xC0B002A1
SAAF161
-1062206815
3232760481 |
The model in Node Setting is different from the actual model. |
The model in Node Setting of 'Pro-Studio EX' is different from the actual model. Please check the followings, and then execute Transfer or Delete again.
-
The Node type is the same as that of the actual model.
-
The IP address setting is correct.
-
The connected GP model is correct. |
0xC0B002A2
SAAF162
-1062206814
3232760482 |
Cannot read the project file from GP because the file does not exist in GP3000 series or is broken. |
Please transfer the project file from 'GP-Pro EX' to the GP3000 Series Node. |
0xC0B002A3
SAAF163
-1062206813
3232760483 |
Cannot transfer the network project because the GP3000 series Runtime version is old. |
Please transfer the new runtime from 'GP-Pro EX' to the GP3000 Series Node. |
0xC0B002A4
SAAF164
-1062206812
3232760484 |
Cannot register the device in the device cache. |
When the sampling cycle of the device cache is 0, the device of the PC or the GP2000 Series Node cannot be registered. Please change the sampling cycle to a value other than 0 before registration. |
0xC0B002A5
SAAF165
-1062206811
3232760485 |
Failed to save the project file. |
If the hard-disk capacity of the PC is insufficient, please increase it and execute the operation again. Or please restart the PC and execute again. |
0xC0B002A6
SAAF166
-1062206810
3232760486 |
Failed to process because Read SRAM Backup Data is now being used. |
Please execute Read SRAM Backup Data again. |
0xC0B002A7
SAAF167
-1062206809
3232760487 |
Parameter Error in Read SRAM Backup Data |
Please execute Read SRAM Backup Data using a correct parameter. |
0xC0B002A8
SAAF168
-1062206808
3232760488 |
Failed to write to a saved file. |
If the hard-disk capacity of the PC is insufficient, please increase it and execute the operation again. Or please restart the PC and execute again. |