| Error Code* |
Error Message |
Cause and Troubleshooting |
| 0xC0B00090
SAAA144
-1062207344
3232759952 |
The specified NODE (XX) has not been registered in the network project.
(XX: NODE name) |
Please reboot your PC. If not solved, install it again. |
0xC0B00091
SAAA145
-1062207343
3232759953 |
The specified NODE (XX) is not a GP Series NODE.
(XX: NODE name) |
0xC0B00092
SAAA146
-1062207342
3232759954 |
The device of the specified NODE (XX) is not supported.
(XX: NODE name) |
0xC0B00093
SAAA147
-1062207341
3232759955 |
In (Data Transfer: XX Transfer Source: XX Transfer Destination: XX), the data types are different. In data transfer to/from a GP Series NODE, the source and the destination must have the same data type. |
Please confirm the settings of the data transfer feature, following the direction of the message. |
0xC0B00094
SAAA148
-1062207340
3232759956 |
Cannot transfer the data. In (Data Transfer: XX Transfer Source: XX Transfer Destination: XX), the source and the destination have different group structures. |
Please confirm the settings of the data transfer feature, following the direction of the message. |
0xC0B00095
SAAA149
-1062207339
3232759957 |
Cannot transfer the data. In (Data Transfer: XX Transfer Source: XX Transfer Destination: XX), the data type of the transfer destination is unsupported. |
0xC0B00096
SAAA150
-1062207338
3232759958 |
Cannot transfer the data. In (Data Transfer: XX Transfer Source: XX Transfer Destination: XX), the data type of the transfer source is unsupported. |
Please confirm the settings of the data transfer feature, following the direction of the message. |
0xC0B00097
SAAA151
-1062207337
3232759959 |
In (Data Transfer: XX Transfer Source: XX Transfer Destination: XX), the data types are different. Please set the same data type. |
0xC0B00098
SAAA152
-1062207336
3232759960 |
In (Data Transfer: XX Transfer Source: XX Transfer Destination: XX), the data count is 0 or out of range. |
0xC0B00099
SAAA153
-1062207335
3232759961 |
In (Data Transfer: XX Transfer Source: XX Transfer Destination: XX), word access to a 32-bit device of a GP Series Node is specified. This access method is not supported. |
0xC0B0009A
SAAA154
-1062207334
3232759962 |
In (Data Transfer: XX Transfer Source: XX Transfer Destination: XX), the transfer source is out of the valid device range. |
Please confirm the settings of the data transfer feature, following the direction of the message. |
0xC0B0009B
SAAA155
-1062207333
3232759963 |
In (Data Transfer: XX Transfer Source: XX Transfer Destination: XX), the transfer destination is out of the valid device range. |
0xC0B0009C
SAAA156
-1062207332
3232759964 |
The specified action was not found in (XX). Please check it again.
(XX: ???) |
Please confirm the action settings, following the direction of the message. |
0xC0B0009D
SAAA157
-1062207331
3232759965 |
(Data Transfer: XX Transfer Source Group: XX) has too large total buffer size of device data. Please divide the group. (XX Bytes or less) |
Please reduce the no. of group symbol data (array element count, member count, or data count of each member), following the direction of the message. |
0xC0B0009E
SAAA158
-1062207330
3232759966 |
(Data Transfer: XX Transfer Source Group: XX) has too large total device size. Please divide the group. (XX Bytes or less) |
0xC0B0009F
SAAA159
-1062207329
3232759967 |
(Device Cache: XX) has too large total device size. Please divide the device cache. (XX Bytes or less) |
In the 'Pro-Studio EX' Feature screen, please reduce the no. of devices in the device cache. |
0xC0B000A0
SAAA160
-1062207328
3232759968 |
Too many device caches are registered. Please reduce them. (X or less) |
In the 'Pro-Studio EX' Feature screen, please reduce the no. of registered device caches. |
