| Error Code* |
Error Message |
Cause and Troubleshooting |
0xC0B0006F
SAAA111
-1062207377
3232759919 |
Too many trigger conditions. The number must be within XX.
(XX: Number) |
Please reduce the no. of trigger conditions, following the direction of the message. |
0xC0B00071
SAAA113
-1062207375
3232759921 |
(Symbol Sheet: XX Group: XX) has too large total size of device data. Please divide the group. (XX Bytes or less) |
Please reduce the no. of group symbol data (array element count, member count, or data count of each member), following the direction of the message. |
0xC0B00072
SAAA114
-1062207374
3232759922 |
Too many actions to register. |
Please reduce the no. of registered actions. |
0xC0B00073
SAAA115
-1062207373
3232759923 |
Unsupported trigger condition is set for the node (XX) (A GP Series node has trigger-condition restrictions. For more details, please refer to the manual).
(XX: NODE name) |
Please confirm the trigger condition, following the direction of the message.
Please confirm the trigger condition, following the direction of the message. |
0xC0B00074
SAAA116
-1062207372
3232759924 |
The trigger condition (XX) is for a GP Series node. Logic operation is not supported in this type of trigger condition.
(XX: Trigger condition name) |
0xC0B00075
SAAA117
-1062207371
3232759925 |
The structure of a sheet/group in the symbol sheet of (XX) is collapsed. Please create it again.
(XX: ???) |
Please re-create the group symbol, following the direction of the message. |
0xC0B00076
SAAA118
-1062207370
3232759926 |
No trigger condition exists in (XX). The trigger condition may have been deleted. Please check it again.
(XX: ???) |
Please confirm those using the trigger condition (data transfer feature, action feature, etc.), following the direction of the message. |
0xC0B00077
SAAA119
-1062207369
3232759927 |
The node specified in the trigger condition used in (XX) does not exist. The node may have been deleted. Please check it again.
(XX: ???) |
Please confirm the trigger condition, following the direction of the message. |
0xC0B00078
SAAA120
-1062207368
3232759928 |
The transfer-source constant value specified in data transfer (XX) has an error.
(XX: Data transfer name) |
Please confirm that the constant value is proper for the data type. |
0xC0B00080
SAAA128
-1062207360
3232759936 |
(Symbol Sheet: XX, Symbol: XX Address: XX and Address: XX) is invalid as a device address. |
Please confirm the settings of the symbol sheet, following the direction of the message. |
0xC0B00081
SAAA129
-1062207359
3232759937 |
Because of the non-bit type symbol in the previous line, consecutive bit type is unavailable for (Symbol Sheet: XX, Symbol: XX, and Address: XX). Please check it again. |
0xC0B00082
SAAA130
-1062207358
3232759938 |
Because of the bit type symbol in the previous line, consecutive non-bit type is unavailable for (Symbol Sheet: XX, Symbol: XX, and Address: XX). Please check it again. |
Please confirm the settings of the symbol sheet, following the direction of the message. |
0xC0B00083
SAAA131
-1062207357
3232759939 |
Cannot specify consecutive from the previous line for (Symbol Sheet: XX Symbol: XX Address: XX). Please check whether it is within the device range. |
0xC0B00084
SAAA132
-1062207356
3232759940 |
(Symbol Sheet: XX Symbol: XX Address: XX) is beyond the valid device range. |
0xC0B00085
SAAA133
-1062207355
3232759941 |
(Symbol Sheet: XX Symbol: XX) does not have any valid symbols before. Cannot judge for which device the bit specification is. |
0xC0B00086
SAAA134
-1062207354
3232759942 |
(Symbol Sheet: XX Group: XX) does not have any valid symbols. A group must have at least 1 symbol. |
Please confirm the settings of the symbol sheet, following the direction of the message. |
0xC0B00087
SAAA135
-1062207353
3232759943 |
(Symbol Sheet: XX) has nonconsecutive symbols. Cannot set them in array. |
0xC0B00088
SAAA136
-1062207352
3232759944 |
(Symbol Sheet: XX Array Group: XX) has too many devices to support. |
Please confirm the settings of the symbol sheet, following the direction of the message. |
| 0xC0B00089
SAAA137
-1062207351
3232759945 |
(Symbol Sheet: XX Array Group: XX) is beyond the valid device range. |
