| Error Code* |
Error Message |
Cause and Troubleshooting |
0xC0AF0015
RYAA021
-1062273003
3232694293 |
The specified access type is illegal. |
A fatal error occurred. Please perform forced transfer of 'GP-Pro EX', and then execute transfer again.
|
0xC0AF0016
RYAA022
-1062273002
3232694294 |
The specified data type is illegal. |
0xC0AF0017
RYAA023
-1062273001
3232694295 |
The no. of data you specified is too many to write (Please reduce it to XX or fewer)
(XX: Data number) |
0xC0AF0018
RYAA024
-1062273000
3232694296 |
The operation result to write is below the lower limit value. |
Attempted to write an out of range value. Please change the setting to write an in-range value. |
0xC0AF0019
RYAA025
-1062272999
3232694297 |
The operation result to write is beyond the upper limit value. |
0xC0AF001A
RYAA026
-1062272998
3232694298 |
Could not send processing request to the network destination due to insufficient memory. |
Please close another application or restart the OS. |
0xC0AF001B
RYAA027
-1062272997
3232694299 |
The specified group was not found. |
A fatal error occurred. Please perform forced transfer of 'GP-Pro EX', and then execute transfer again.
|
0xC0AF001C
RYAA028
-1062272996
3232694300 |
The two compared access tickets differ in their nodes, equipment, or devices. |
A fatal error occurred. Please perform forced transfer of 'GP-Pro EX', and then execute transfer again.
|
0xC0AF001D
RYAA029
-1062272995
3232694301 |
The specified access ticket is not for this node. |
0xC0AF001E
RYAA030
-1062272994
3232694302 |
Could not register the cache because of insufficient memory. |
Please close another application or restart the OS. |
0xC0AF0020
RYAA032
-1062272992
3232694304 |
The access ticket you tried to use in block access is not of the block type. |
A fatal error occurred. Please perform forced transfer of 'GP-Pro EX', and then execute transfer again.
|
0xC0AF0021
RYAA033
-1062272991
3232694305 |
The small service to process was not found. |
0xC0AF0022
RYAA034
-1062272990
3232694306 |
The size of block access to the device exceeded the limit. |
The max buffer size for Device Block Write/Read is 10KB. Please set a size less than that. |
0xC0AF0025
RYAA037
-1062272987
3232694309 |
The no. of requests to Read/Write via network at a time exceeded the limit (XX).
(XX: Device no.) |
Please recheck the settings of requests from 'Pro-Server EX' and 'GP-Pro EX' to the network destination, and redesign the system to limit the no. of requests to the max value. |
0xC0AF0030
RYAA048
-1062272976
3232694320 |
Communication error occurred during communication with the destination node. Please confirm that the network connection to the node has been properly established. |
Please check whether the network cable between the local node and the destination node etc. is correctly connected. |
0xC0AF0031
RYAA049
-1062272975
3232694321 |
The destination node did not responded within the specified time. Please confirm that the network connection to the node has been properly established. |
- |
0xC0AF0032
RYAA050
-1062272974
3232694322 |
The destination node did not responded within the specified time. Please confirm that the network connection to the node has been properly established. |
- |
0xC0AF0033
RYAA051
-1062272973
3232694323 |
Communication with the destination NODE stopped because of the change from online to offline, or to transfer mode. |
Please place GP3000 Series online. |
0xC0AF0040
RYAA064
-1062272960
3232694336 |
Failed to read the device. |
The data may have been read into an illegal or undefined device address. Please specify a proper device address. |
0xC0AF0041
RYAA065
-1062272959
3232694337 |
Failed to write the device. |
The data may have been written into an illegal or undefined device address. Please specify a proper device address. |
0xC0AF0045
RYAA069
-1062272955
3232694341 |
The specified request is not supported. |
Please upgrade 'GP-Pro EX' to a supported version by transferring the system with 'GP-Pro EX'.
Or the Node Type set in the 'Pro-Studio EX' Node Settings may be different from the actual model. Please confirm that the Node Type is properly set. |
0xC0AF0046
RYAA070
-1062272954
3232694342 |
The specified request is not supported. |
Please upgrade 'GP-Pro EX' to a supported version by transferring the system with 'GP-Pro EX'. |
0xC0AF0050
RYAA080
-1062272944
3232694352 |
The project ID of the network project file is different (A different NPJ is being used). |
Please transfer the network project file with 'Pro-Studio EX' again. |
0xC0AF0051
RYAA081
-1062272943
3232694353 |
The network project file does not have necessary data. |
0xC0AF0052
RYAA082
-1062272942
3232694354 |
The network project file is damaged. |
Please transfer the network project file with 'Pro-Studio EX' again. If it's not solved, after performing forced transfer of 'GP-Pro EX', please transfer the network project file with 'Pro-Studio EX' again. |
0xC0AF0053
RYAA083
-1062272941
3232694355 |
The network project file does not exist. |
0xC0AF0060
RYAA096
-1062272928
3232694368 |
Failed to transfer data to GP. |
Please confirm that the Device/PLC connected to the GP works properly. Or, please transfer the network project file with 'Pro-Studio EX' again. |
0xC0AF0061
RYAA097
-1062272927
3232694369 |
Failed to read the device from GP. |
Accessed a read-protect area. Please change the settings to avoid this. |
0xC0AF0062
RYAA098
-1062272926
3232694370 |
Failed to write the device to GP. |
Accessed a write-protect area. Please change the settings to avoid this. |
0xC0AF0063
RYAA099
-1062272925
3232694371 |
In device access to GP, the device no. was out of range. |
An invalid device was specified. Attempted to access a nonexistent device. |
0xC0AF0064
RYAA100
-1062272924
3232694372 |
Failed to transfer data to GP. (The destination NODE does not respond.) |
The Destination Node does not respond. Please check the followings:
-The network cable is properly connected
-The destination node is ON, and
-The IP address in the Node Setting of 'Pro-Studio EX' is correct.
Or, please transfer the network project file with 'Pro-Studio EX' again. |
0xC0AF0065
RYAA101
-1062272923
3232694373 |
Failed to read the device from GP. (The destination NODE does not respond.) |
The Destination Node does not respond. Please check the followings:
-The network cable is properly connected
-The destination node is ON, and
-The IP address in the Node Setting of 'Pro-Studio EX' is correct. |
0xC0AF0066
RYAA102
-1062272922
3232694374 |
Failed to write the device to GP. (The destination NODE does not respond.) |
