Otasuke Pro!> FAQ > GP4000 > What do I need to create screen data for the GP4000 series?

FAQ

What do I need to create screen data for the GP4000 series?

The following items are required to create screen data for the GP4000 series.

Item

Model

Description

HMI Screen Editor & Logic Programming Software
[ GP-Pro EX ]

PFXEXEDV** *1

Software to create screen data for the GP4000 series.
Requires Windows^® 2000, Windows^® XP, Windows Vista^® and Windows^® 7.

Click here for Windows^® 7 support information.

Transfer cable *2

- CA3-USBCB-01
- ZC9USCBMB1
- Commercial USB cable
(USB Type A/mini-B)

Cable to transfer screen data created on a PC to GP4000 series.

*1:

"* *" is changed with the version of software.
GP-Pro EX Ver. 3.0 or later is required for GP-43**/44** series and Ver. 3.01 or later for GP-42**/ 45**/46** series.

*2:

It’s possible to transfer screen data via Ethernet, with a SD card (only for models which are equipped with the Ethernet interface/SD card slot) or a USB storage device.

NOTE

-	GP-PRO/PBIII C-Package can't be used for GP4000 series.
-	The following transfer cables can't be used for GP4000 series.
	GPW-CB02
	GPW-CB03
	GP430-CU02-M

↑Back to page top

← Return to the previous page

FAQ for use | Protection of Personal Information | Trademark Acknowledgments | About Intellectual Property Rights | Terms of Use