Manufacturer |
Driver |
System Requirement |
| Mitsubishi Electric Corporation |
A Series CPU Direct |
The following GPP function software package is required;
Windows 2000:
- GX Developer Ver.7 or higher
Windows XP:
- GX Developer Ver.8 or higher
Windows Vista:
- GX Developer Ver.8.58L or higher |
| Q Series CPU Direct |
| QnA Series CPU Direct |
| QUTE Series CPU Direct |
| FX Series CPU Direct |
| Yaskawa Electric Corporation |
MP Series SIO (Extension) |
The following engineering tool is required;
- MPE720 Ver.5.38/Ver.6.04 or higher |
| MP Series Ethernet (Extension) |
| Yokogawa
Electric Corporation |
Personal Computer Link SIO |
The following programming tool is required;
- WideField2 R3.01 or higher
| NOTE |
| The Pass-Through function can be used only when the display is connected to the programming port on the CPU. |
|
| Personal Computer Link Ethernet |
The following programming tool is required;
- WideField2 R3.01 or higher |
| OMRON Corporation |
CS/CJ Series Host Link |
The following programming support tool is required;
- CX-Programmer Version3.00 or higher
| NOTE |
| To use the Pass-Through function, [SYSMAC WAY] needs to
be specified for [Network Type] in the ladder software. |
|
| CS/CJ Series Ethernet |
The following programming support tool is required;
- CX-Programmer Version3.00 or higher
| NOTE |
*If the High Performance Unit is written by the Pass-Through
function, response of the link unit temporarily stops and an error may be displayed on the display.
* To use the Pass-Through function, [SYSMAC WAY] needs to be specified for [Network Type] in the ladder software. |
|
|
Rockwell Automation, Inc. |
DF1 |
The following programming support tool is required;
- RSLogix500
- RSLogix5000
|
|
SIEMENS AG |
SIMATIC S7 MPI Direct |
The following programming tool is required;
- SIEMENS SIMATIC Software STEP7 Version 5.1 or higher
- STEP7 - Micro/WIN Version 4.0.1.10 or higher
|
| KEYENCE
Corporation |
KV-700/1000/3000/5000 CPU Direct |
The following ladder support software is required.
- KV STUDIO:
Ver1.17, Ver.2.5, Ver.4.14, Ver.5.02
- KV BUILDER:
1.13M, 2.02A, 4.70
| NOTE |
| During [Transfer to PLC] and [Read from PLC] on the ladder
support software, the communications with the display may be temporarily interrupted. |
|
