Products
Download
Contact us
Back to Top
FAQ
Can I change the time cycle of the Historical Trend Graph?

You can display the line chart in a longer cycle for normal use and zoom in only when you want to view it in detail as a line chart within a shorter cycle.



How to set up

1. Set [Sampling].
 
   
2. Place a Historical Trend Graph part and make settings.
   
 

Setup of [Cycle Change (Thin Out)]
 
  On the [Display Area] tab, click [Extended].
 
   
  Set the [Thin Out Value] and the [Default Magnification].
 
   
  Open the [Switch] tab and check [Zoom In] and [Zoom Out] if needed.
 
   
 
Thin Out Value

If you set the Thin Out mode, sampling data are displayed after being thinned out based on the Thin Out Value. The Thin Out mode is performed only when the [Default Magnification] is set to [Thin Out Mode] or when the "ZOOM OUT" button is touched while the graph is displayed at the same magnification.

e.g.) Thin Out Value = 2
- Displaying at the same magnification   - Displaying zoomed out (Thin Out Mode)

e.g.) Thin Out Value = 3
- Displaying at the same magnification   - Displaying zoomed out (Thin Out Mode)
   
 
Default Magnification
Set the display magnification when the screen is changed.
Thin Out Mode Shows the most zoomed-out graph. The Thin Out feature is performed.
Original Size
Displays at the same magnification. The Thin Out feature is not performed.
2 Times
Displays at a magnification of 2. The Thin Out feature is not performed.
4 Times
Displays at a magnification of 4. The Thin Out feature is not performed.
8 Times
Displays at a magnification of 8. The Thin Out feature is not performed.


   



NOTE

To use this feature, your screen editor must be GP-Pro EX Ver. 2.20 or above.


↑Back to page top → Close this page
FAQ for use | Protection of Personal Information | Trademark Acknowledgments | About Intellectual Property Rights | Terms of Use
Copyright (C) 2005- Schneider Electric Japan Holdings Ltd. All Rights Reserved.