Products
Download
Contact us
Back to Top
replace
 
  • 1Let's learn compatibility of hardware!
  • 2Let's learn comparibility of the connection device!
  • 3Let's learn compatibility of software!
  • 4Let's learn how to replace!
 
 Project Converter Error Message
The error messages displayed during Project Converter operation and the causes and solutions are as follows.
 The selected Device/PLC is unavailable for conversion. Change the Device/ PLC before conversion.

The selected device/PLC type is not supported by GP-Pro EX. Please select a device/PLC that is supported by GP-Pro EX in GP-PRO/PBIII for Windows and run the Project Converter again. For the information on devices/PLCs supported by GP-Pro EX, see "Convertible Communication Driver List".

How to change [Device/PLC Type] in GP-PRO/PBIII for Windows
1. Select the [Device/PLC Type] icon in GP-PRO/PBIII for Windows's Project Manager.
   
   
2. The [Change] dialog box is displayed. Select a [Device/PLC Type] you want to change to. Always confirm the device address settings after changing a [Device/PLC Type].
   
 
   
 
 Cannot read the source Device/PLC file.

Cannot recognize the convert-from device model. In GP-PRO/PBIII for Windows, change it to a device type supported by GP-Pro EX and then execute Project Converter again. For the information on devices/PLCs supported by GP-Pro EX, see "Convertible Communication Driver List".

How to change [Device/PLC Type] in GP-PRO/PBIII for Windows
1. Select the [Device/PLC Type] icon in GP-PRO/PBIII for Windows’ Project Manager.
   
   
2. The [Change] dialog box is displayed. Select a [Device/PLC Type] you want to change to. Always confirm the device address settings after changing a [Device/PLC Type].
   
 
   
 
 The selected model is unavailable for conversion. Change the model.

The selected device/PLC type is not supported by GP-Pro EX. Please select a device/PLC that is supported by GP-Pro EX in GP-PRO/PBIII for Windows and run the Project Converter again. For the information on devices/PLCs supported by GP-Pro EX, see "Models Comvertible to GP3000 Series".

·How to change [GP Type] in GP-PRO/PBIII for Windows
1. Select the [GP Type] icon in GP-PRO/PBIII for Windows’ Project Manager.
   
   
2. The [Change] dialog box is displayed. Select a [GP Type] you want to change to. Be aware that the GP may have different features before and after conversion.
   
 
   
 
 Cannot read the model information file.

Cannot recognize the convert-from device model. In GP-PRO/PBIII for Windows, change it to a device type supported by GP-Pro EX and then execute Project Converter again. For the information on devices/PLCs supported by GP-Pro EX, see "Models Comvertible to GP3000 Series".

·How to change [GP Type] in GP-PRO/PBIII for Windows
1. Select the [GP Type] icon in GP-PRO/PBIII for Windows’ Project Manager.
   
   
2. The [Change] dialog box is displayed. Select a [GP Type] you want to change to. Be aware that the GP may have different features before and after conversion.
   
 
   
 
 Cannot read AGPCnv.cfg file.

Failed to load GP-Pro EX's AGPCnv.cfg file. Install GP-Pro EX again.
 
 Cannot read the prw file.

Failed to read a GP-PRO/PBIII for Windows file (*.prw). Microsoft Windows access authority may be set to the GP-PRO/PBIII for Windows file (*.prw). Check the file properties in Explorer and check the access authority settings.
 
 Cannot access the parts file.

Failed to read a GP-PRO/PBIII for Windows' Part file (*.PDB or *.BPD). Microsoft Windows access authority may be set to the GP-PRO/PBIII for Windows' Part file (*.PDB or *.BPD). Check the file properties in Explorer and check the access authority settings.
 
 Invalid extention.

An incorrect extension is designated in Project Converter's [Convert To]. Input a correct extension (*.prx).
↑Back to top page ← Return to the previous page
FAQ for use | Protection of Personal Information | Trademark Acknowledgments | About Intellectual Property Rights | Terms of Use
Copyright (C) 2005- Schneider Electric Japan Holdings Ltd. All Rights Reserved.