Contact us
Back to Top
  • 1Let's learn compatibility of hardware!
  • 2Let's learn comparibility of the connection device!
  • 3Let's learn compatibility of software!
  • 4Let's learn how to replace!


Differences of Scan Time Settings

In GP-PRO/PB3 C-Package, the minimum scan time is 10ms and the setting interval is 10ms. GP-Pro EX's setting interval is 1ms.

Comparison of Setting Items
In GP-PRO/PB3 C-Package, you can set the scan time only by 10 ms, for instance, 10ms, 20ms, 30ms....

In GP-Pro EX, you can set it by 1 ms, for instance, 11ms, 12ms, or 13ms....
which enables to set the scan time more constantly.

Constant Scan is the mode with which you set the scan time to assign in the logic and which runs keeping it.

Back to page top Return to the previous page
FAQ for use | Protection of Personal Information | Trademark Acknowledgments | About Intellectual Property Rights | Terms of Use
Copyright (C) 2005- Schneider Electric Japan Holdings Ltd. All Rights Reserved.