Otasuke Pro! > FAQ > GP-Pro EX > Compatibility of the H tag

Compatibility

Compatibility of the H tag

If you have called up a screen with the H tag placed on it on GP-PRO/PBIII C-Package, a display location of a drawing differs between GP-PRO/PBIII C-Package and GP-Pro EX after conversion.
(*The H tag is converted into the [Draw Action] setting of the part called [Trigger Action] on GP-Pro EX.)

■ For GP-PRO/PBIII C-Package

■ For GP-Pro EX after conversion

Place the H tag on the B2 screen.

[H tag Setting]
Draw a figure on top left of the screen.
(Coordinates: X:0, Y:0)

When the B2 screen is loaded to the B1 screen,

Since display of the erase screen begins at the top left of the [B2] screen which is the origin, the minus coordinates of [X : -230 and Y : -160] are designated.

Place the Trigger Action part on the B2 screen.

[Trigger Action Setting]
Draw a figure on top left of the screen.
(Coordinates: X:0, Y:0)

When the B2 screen is loaded to the B1 screen,

Since display of the erase screen begins at the top left of the [B1] screen which is the origin, the same coordinates of [X : 0 and Y : 0] are designated.

The origin for displaying the erase screen differs between GP-PRO/PBIII and GP-Pro EX. It's necessary to change the coordinates of the erase screen.

For the example above, [X: -230 and Y:-160] --> [X: 0 and Y: 0]

↑Back to top page

← Return to the previous page

FAQ for use | Protection of Personal Information | Trademark Acknowledgments | About Intellectual Property Rights | Terms of Use