Products
Download
Contact us
Back to Top
 FAQ
 How to install the driver of a USB transfer cable (GPW-CB03) in the ordinary mode of Windows® 7

In order to install the driver of a USB transfer cable (GPW-CB03) in the ordinary mode of Windows® 7 (32 bit, SP1), please make the following settings.
 
IMPORTANT
For Windows® 7-supporting operation of GP-PRO/PBIII for Windows, click here.
 
Settings
1. Start Windows® 7 in the ordinary mode.
2. Copy the driver of the USB transfer cable (GPW-CB03) to be connected to any location.
 
NOTE
To download the driver of the USB transfer cable (GPW-CB03), click here.
   
3. Connect the USB transfer cable (GPW-CB03) to the USB port of the PC.
4. Right-click [Computer] on the Windows mark of Windows® 7 and then, click [Properties].
 
   
5. Select [Device Manager].
 
   
6. Right-click [Unknown device] in [Other devices] on the Device Manager screen and select [Update Driver Software].
 
   
7. In [Update Driver Software - Unknown Device], select [Browse my computer for driver software].
 
   
8. Click [Browse] button and specify the location to which the cable driver was copied in the step 2. Then click [Next].
 
   
9. Following the instructions shown on the screen, install the driver.
   
  After making the settings above, the USB transfer cable (GPW-CB03) can be used in the ordinary mode of 32-bit Windows® 7 (SP1).
 
Return to Top Back
FAQ for use | Protection of Personal Information | Trademark Acknowledgments | About Intellectual Property Rights | Terms of Use
Copyright (C) 2005- Schneider Electric Japan Holdings Ltd. All Rights Reserved.